Abstract:Objectives To reveal the force profiles recorded by haptic autonomous robotic force feedback during the transcrestal sinus floor elevation (TSFE) process, providing a reference for the surgery strategy during TSFE. Materials and methods A total of 42 maxillary sinus models with different angles of the sinus floor (30°, 40°, 50°, 60°, 70°, 80°, and 90°, compared to vertical plane) were 3D printed. Implant site preparation was performed using a robotic system, and the total force (Ft) and axial force along the drill (Fz) during the surgery were recorded by the haptic robotic arm. The actual initial breakthrough point (drill contacting sinus floor) and complete breakthrough point (drill penetrating the sinus floor) were defined visually (the actual IBP and the actual CBP). The theoretical initial breakthrough point (the theoretical IBP) and the theoretical complete breakthrough point (the theoretical CBP) defined by the robot‐guided system and the CBCT were determined by real‐time force feedback and imaging distance measurement, respectively. The distance from the bottom of the resin model to the actual IBP and the actual CBP was defined as Di and Dt, respectively. Results The difference in Fz began to increase significantly at 70°, while the difference in Ft became significant at 60°. When the angle was greater than 70°, there was no significant difference in the discrepancy between the actual and theoretical perforation points. Compared to judging the breakthrough point by CBCT, real‐time force feedback TSFE under robotic surgery achieved more accurate initial breakthrough point detection. Conclusions The smaller the angle, the larger the breakthrough force for the drill. The real‐time force feedback of haptic robotic system during TSFE could provide reliable reference for dentists. More clinical studies are needed to further validate the application of robotic surgery assisted TSFE.

Spatial Shape Sensing of a Multisection Continuum Robot with Integrated DTG Sensor for Maxillary Sinus Surgery

Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An <i>in</i>-<i>vitro</i> study

Design and path tracking control of a continuum robot for maxillary sinus surgery

Design and Validation of a Master-slave Continuum Robot for Maxillary Sinus Surgery

A CT-guided Control Framework of a Robotic Flexible Endoscope for the Diagnosis of the Maxillary Sinusitis

Development and validation of a two‐segment continuum robot for maxillary sinus surgery

Shape Sensing Techniques for Continuum Robots in Minimally Invasive Surgery: A Survey

Concentric Wire-Driven Robots with in Situ Torsion for Transnasal Surgery

Development of a Compact Continuum Tubular Robotic System for Nasopharyngeal Biopsy

Continuum robots for endoscopic sinus surgery: Recent advances, challenges, and prospects

Design of the continuum robotic system for nasal minimally invasive surgery

Approach and control for robot assisted sinus surgery

Shape-Reconstruction-Based Force Sensing Method for Continuum Surgical Robots with Large Deformation

A transcrestal sinus floor elevation strategy based on a haptic robot system: An in vitro study

A Robotic System for Implant Modification in Single-stage Cranioplasty

Design of a Multi-Arm Concentric-Tube Robot System for Transnasal Surgery

Preliminary Study on Magnetic Tracking-Based Planar Shape Sensing and Navigation for Flexible Surgical Robots in Transoral Surgery: Methods and Phantom Experiments

Pilot Study On Shape Sensing For Continuum Tubular Robot With Multi-Magnet Tracking Algorithm

Vision-Based Intraoperative Shape Sensing Of Concentric Tube Robots

Design and analysis of a continuum robot for transnasal skull base surgery

A Compact Surgical Robot System for Craniomaxillofacial Surgery and its Preliminary Study