Abstract:• Zero-valent copper supported on polyurethane foam (Cu-NC) was fabricated. • 1.85% Cu loading (Cu-NC) demonstrated the best performance for TTC removal. • H 2 O 2 (65.0 μM) was generated in situ with presence of Cu-NC suspension. • High degradation efficiency (74.1–94.2%) was maintained in the pH 3.0–11.0 range. • Activation of PMS by Cu(I) produced HO • via outer sphere interaction. The occurrence of tetracycline (TTC) in the environment can exacerbate microbial selection pressure and trigger bacterial resistance, raising potential risks to the ecosystem and public health. Here, we report that copper supported polyurethane foam (Cu-NC) can efficiently activate PMS to degrade TTC. Results demonstrated that the degradation rate of TTC was 91.3% and the pseudo first-order kinetic constant of 0.0762 min −1 was achieved after 40 min reaction at pH 5.0. Activation of PMS by Cu-NC was proposed to proceed via two sequential processes, which was different from the conventional mechanism for sulfate radical generation. Cu 0 initially reacts with dissolved oxygen to generate H 2 O 2 and Cu(I) (s) in situ in the solid form. Then Cu(I) (s) solves the relative instability of low-valent transition metal ions in aqueous solution, thus improving the activation efficiency of PMS. A novel mechanism for Cu(I) (s) activation of PMS to generate HO • was proposed and elucidated through outer-sphere interaction (electrostatic bonding) and acid-base theory. Superoxide radical and Cu 0 accelerate the Cu(II)/Cu(I) redox, overcoming the rate-limiting step in Fenton-like reaction. Cu-NC showed an excellent cycling stability (80.8% removal efficiency after fifth run) in PMS activation with low Cu ion leaching (＜0.2 mg/L). The Cu-NC/PMS system also exhibited satisfactory removal of TTC in the presence of various water matrices. This study can deepen the understanding of the generation of HO • in the PMS activation process and provide a promising strategy for pollutants degradation in wastewater treatment.

Peroxymonosulfate Activation by Vacuum Ultraviolet and Trace Copper Ions: A New Way to Boost Cu(II)/Cu(I) Redox Cycle

Organically Coordinated Cu(II) Activated Peroxymonosulfate for Enhanced Degradation of Emerging Contaminants

Efficient activation of peroxymonosulfate by copper supported on polyurethane foam for contaminant degradation: Synergistic effect and mechanism

Complexation Enhances Cu(II)-Activated Peroxydisulfate: A Novel Activation Mechanism and Cu(III) Contribution

Enhancement of Peroxymonosulfate Activation for Antibiotics Removal by Nano Zero Valent Tungsten Induced Cu(II)/Cu(I) Redox Cycles

Visible-light-driven Photocatalytic Activation of Peroxymonosulfate by Cu2(OH)PO4 for Effective Decontamination.

Strong degradation of orange II by activation of peroxymonosulfate using combination of ferrous ion and zero-valent copper

Heterogeneous Co-Activation of Peroxymonosulfate by CuCoFe Calcined Layered Double Hydroxides and Ultraviolet Irradiation for the Efficient Removal of P-Nitrophenol

Promoted Peroxymonosulfate Activation By Electron Transport Channel Construction For Rapid Cu(Ii)/Cu(I) Redox Couple Circulation

Efficient peroxymonosulfate activation by microscale CuO coated melamine-cyanuric acid supramolecular toward tetracycline degradation

Trace Cupric Species Triggered Decomposition of Peroxymonosulfate and Degradation of Organic Pollutants: Cu(III) Being the Primary and Selective Intermediate Oxidant

Ultrahigh Peroxymonosulfate Utilization Efficiency over CuO Nanosheets Via Heterogeneous Cu(III) Formation and Preferential Electron Transfer During Degradation of Phenols.

Copper Oxides Activate Peroxymonosulfate for Degradation of Methylene Blue Via Radical and Nonradical Pathways: Surface Structure and Mechanism.

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Peroxymonosulfate Activation by Octahedral Cu2O for Orange Ⅰ Degradation Via Radical and Non-Radical Pathways

A New Insight into the Mechanism in Fe3O4@CuO/PMS System with Low Oxidant Dosage

Cuprous-mediated peroxymonosulfate activation for Fenton-like removal of micropollutants: The function of co-catalyst and the accelerated degradation mechanism

Efficient Peroxymonosulfate Activation in Electron-Rich/poor Reaction Sites Induced by Copper–iron Oxide Heterojunctions/interfaces: Performance and Mechanism

Electrocatalytically Enhanced Cu(II)/peroxymonosulfate (PMS) Oxidation: Focus on Electrically-Induced Sustained Cu(II)/Cu(I)/Cu(III) Cycling and Suppression of Singlet Oxygen (1O2) Production

Electrocatalytically enhanced Cu(II)/peroxymonosulfate (PMS) oxidation: Focus on electrically-induced sustained Cu(II)/Cu(I)/Cu(III) cycling and suppression of singlet oxygen ( 1 O 2 ) production

Degradation of 2,4-Dichlorophenol by Activating Persulfate and Peroxomonosulfate Using Micron or Nanoscale Zero-Valent Copper.