Extraction of Moso Bamboo Parameters Based on the Combination of ALS and TLS Point Cloud Data

Suying Fan,Sishuo Jing,Wenbing Xu,Bin Wu,Mingzhe Li,Haochen Jing

DOI: https://doi.org/10.3390/s24134036

IF: 3.9

2024-06-21

Sensors

Abstract:Extracting moso bamboo parameters from single-source point cloud data has limitations. In this article, a new approach for extracting moso bamboo parameters using airborne laser scanning (ALS) and terrestrial laser scanning (TLS) point cloud data is proposed. Using the field-surveyed coordinates of plot corner points and the Iterative Closest Point (ICP) algorithm, the ALS and TLS point clouds were aligned. Considering the difference in point distribution of ALS, TLS, and the merged point cloud, individual bamboo plants were segmented from the ALS point cloud using the point cloud segmentation (PCS) algorithm, and individual bamboo plants were segmented from the TLS and the merged point cloud using the comparative shortest-path (CSP) method. The cylinder fitting method was used to estimate the diameter at breast height (DBH) of the segmented bamboo plants. The accuracy was calculated by comparing the bamboo parameter values extracted by the above methods with reference data in three sample plots. The comparison results showed that by using the merged data, the detection rate of moso bamboo plants could reach up to 97.30%; the R2 of the estimated bamboo height was increased to above 0.96, and the root mean square error (RMSE) decreased from 1.14 m at most to a range of 0.35–0.48 m, while the R2 of the DBH fit was increased to a range of 0.97–0.99, and the RMSE decreased from 0.004 m at most to a range of 0.001–0.003 m. The accuracy of moso bamboo parameter extraction was significantly improved by using the merged point cloud data.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to extract Phyllostachys edulis parameters from merged airborne laser scanning (ALS) and terrestrial laser scanning (TLS) point cloud data in order to improve the accuracy of Phyllostachys edulis parameter extraction. Specifically, the paper has two objectives:

1. **Evaluate the segmentation quality of individual Phyllostachys edulis plants**: By comparing the quality of individual Phyllostachys edulis plant segmentation using the merged ALS - TLS data with that using a single data source (ALS or TLS), evaluate the effectiveness of the merged data in the segmentation of individual Phyllostachys edulis plants.

2. **Evaluate the accuracy of inventory parameters (diameter at breast height and height)**: By using the diameter at breast height and height of individual Phyllostachys edulis plants extracted from the merged ALS - TLS data and a single data source (ALS or TLS), evaluate the accuracy of these parameters and compare them with the field survey data.

To achieve these objectives, the authors adopted a semi - automatic point cloud alignment method. First, targets at the corners of the plot were manually identified and roughly aligned using known coordinates, and then the Iterative Closest Point (ICP) algorithm was used for fine alignment. After that, the Point Cloud Segmentation (PCS) algorithm and the Comparative Shortest Path (CSP) method were used to segment individual Phyllostachys edulis plants from ALS, TLS and ALS - TLS datasets and extract their heights. Finally, the diameter at breast height of individual Phyllostachys edulis plants was extracted by the cylinder fitting method. The research results show that using the merged data can significantly improve the accuracy of Phyllostachys edulis parameter extraction.