Abstract:This paper presents the numerical investigation of the seismic performance of post-tensioned self-centering precast concrete (SCPC) frames with variable friction dampers (VFDs) and hidden corbels (HCs). The VFDs are characterized by the combination of flat and grooved plates, where the friction forces change as the connection deformation increases, which enables designs to meet target seismic performance objectives at different seismic hazard levels. Theoretical and numerical models for the connection are proposed based on connection geometry, and a performance-based seismic design approach for the SCPC frames is outlined to meet target performance objectives at two common seismic hazard levels, the design basis earthquake (DBE) and the maximum considered earthquake (MCE). SCPC frames for a six-story prototype building located in a high seismic zone in California were designed using this procedure. Three frames with HC-VFD-SPSC connections were designed using various methods to mitigate concentration of drifts in the first story, and one frame was designed with conventional constant friction devices (CFDs) for comparison. Nonlinear time-history analyses were performed for these different designs using two sets of ground motions representing the DBE and MCE seismic hazard levels. The analysis results indicate that the frames with the HC-VFD-SCPC connections achieved the target performance objectives. The proposed approaches of modifying post-tensioning and VFD design parameters or column stiffness in the first story were effective in mitigating the concentration of drifts. Additionally, through comparison with the results of the frame with CFDs, it was found that the VFDs are effective in decreasing overall drift demands at the MCE level, as well as mitigating detrimental higher mode effects observed in SCPC frames with CFDs.

Performance-based seismic design of full and partial self-centering steel braced frames using modified lateral force distribution

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Seismic Design of Low-Rise Steel Building Frames with Self-Centering Panels and Steel Strip Braces

Performance-based design of steel frames with self-centering modular panel

Two-level Performance-Based Seismic Design Approach for Steel Frames with Novel Self-Centring Seismic Base Isolators

Seismic design and performance evaluation of steel braced frames with post-tensioned and disc-spring-based self-centering buckling-restrained braces

Performance-based Plastic Design Methodology of Dual Self-Centering Steel Braced Frames

Performance-based seismic design method for disc spring-based self-centering viscous dissipative braced steel frame

Parametric Analysis and Direct Displacement-Based Design Method of Self-Centering Energy-Dissipative Steel-Braced Frames

Seismic Design of Low-Rise Steel Building Frames with Self-Centering Hybrid Damping Connections

A two-level performance-based plastic design method for multi-story steel frames with double-yielding systems

Peak and Residual Deformation-Based Seismic Design for Multi-Story Hybrid Concentrically Braced Frames

Seismic Design and Performance Evaluation of Hybrid Braced Frames Having Buckling-Restrained Braces and Self-Centering Viscous Energy-Dissipative Braces

Performance-based plastic design of multi-story hybrid braced frames with buckling-restrained braces and shape memory alloy braces

Seismic evaluation of low-rise steel building frames with self-centering energy-absorbing rigid cores designed using a force-based approach

Seismic design of beam-through steel frames with self-centering modular panels

Seismic Performance of Partial Self-Centering Prestressed Concrete Frames with Friction Dampers

Comparative seismic analysis of frames with shape memory alloy slip friction dampers

Seismic Analysis of Frame Structures with Self-centering Friction Energy Dissipative Braces

Seismic Design and Performance of Self-Centering Precast Concrete Frames with Variable Friction Dampers

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays