Abstract:Abstract Plastic waste (PW) poses a significant threat as a hazardous material, while the production of cement raises environmental concerns. It is imperative to urgently address and reduce both PW and cement usage in concrete products. Recently, several experimental studies have been performed to incorporate PW into paver blocks (PBs) as a substitute for cement. However, the experimental testing is not enough to optimize the use of waste plastic in pavers due to resource and time limitations. This study proposes an innovative approach, integrating experimental testing with machine learning to optimize PW ratios in PBs efficiently. Initially, experimental investigations are performed to examine the compressive strength (CS) of plastic sand paver blocks (PSPBs). Varied mix proportions of plastic and sand with different sizes of sand are employed. Moreover, to enhance the CS and meet the minimum requirements of ASTM C902-15 for light traffic, basalt fibers, a sustainable industrial material, are also utilized in the manufacturing process of environmentally friendly PSPB. The highest CS of 17.26 MPa is achieved by using the finest-size sand particles with a plastic-to-sand ratio of 30:70. Additionally, the inclusion of 0.5% basalt fiber, measuring 4 mm in length, yields further enhancement in outcome by significantly improving CS by 25.4% (21.65 MPa). Following that, an extensive experimental record is established, and multi-expression programming (MEP) is used to forecast the CS of PSPB. The model’s projected results are confirmed by using various statistical procedures and external validation methods. Furthermore, comprehensive parametric and sensitivity studies are conducted to assess the effectiveness of the MEP-based proposed models. The sensitivity analysis demonstrates that the size of the sand particles and the fiber content are the primary factors contributing to more than 50% of the CS in PSPB. The parametric analysis confirmed the model’s accuracy by demonstrating a comparable pattern to the experimental results. Furthermore, the results indicate that the proposed MEP-based formulation exhibits high precision with an R 2 of 0.89 and possesses a strong ability to predict. The study also provides a graphical user interface to increase the significance of ML in the practical application of handling waste management. The main aim of this research is to enhance the reuse of PW to promote sustainability and economic benefits, particularly in producing green environments with integration of machine learning and experimental investigations.

Sustainable utilization of foundry waste: Forecasting mechanical properties of foundry sand based concrete using multi-expression programming

Comparative analysis of various machine learning algorithms to predict strength properties of sustainable green concrete containing waste foundry sand

Utilization of Solid Waste from Tunnel Excavation As Manufactured Sand with Different Lithology and Pre-Washing Process for Preparation of Eco-Friendly Ultra-High Performance Concretes: Properties and Microstructural Analysis

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Mechanical and durability characteristics of sustainable concrete modified with partial substitution of waste foundry sand

Machine Learning-Based Modeling with Optimization Algorithm for Predicting Mechanical Properties of Sustainable Concrete

Test on Concrete after Adding Foundry Sand

Mechanical behavior of E-waste aggregate concrete using a novel machine learning algorithm: Multi expression programming (MEP)

Sustainable approaches in concrete production: An in-depth review of waste foundry sand utilization and environmental considerations

Experimental Research on the Effects of Waste Foundry Sand on the Strength and Micro-Structural Properties of Concrete

A Machine Learning-Based Genetic Programming Approach for the Sustainable Production of Plastic Sand Paver Blocks

Analysis of the Technical Feasibility of Sustainable Concrete Production Using Waste Foundry Sand as a Fine Aggregate

Toward sustainability: Integrating experimental study and data-driven modeling for eco-friendly paver blocks containing plastic waste

Enhancing Concrete Performance with Waste Foundry Sand Using Ternary Blended Mixes of Ordinary Portland Cement, Silica Fume, and Ground Granulated Blast Furnace Slag

Estimation of compressive strength of waste concrete utilizing fly ash/slag in concrete with interpretable approaches: optimization and graphical user interface (GUI)

Physical and Chemical Properties of Waste Foundry Exhaust Sand for Use in Self-Compacting Concrete

Prediction of the mechanical properties of concrete incorporating simultaneous utilization of fine and coarse recycled aggregate

Data-driven based estimation of waste-derived ceramic concrete from experimental results with its environmental assessment

Experimental investigation of mechanical properties and multi-objective optimization of electronic, glass, and ceramic waste–mixed concrete

Forecasting Compressive Strength of RHA Based Concrete Using Multi-Expression Programming

Experimenting the influence of corncob ash on the mechanical strength of slag-based geopolymer concrete