Abstract:The particle-in-cell (PIC) simulation of an A6 magnetron with diffraction output (MDO) in our earlier work shows the peak output power (especially the short power pulse with several nanoseconds duration) is lowered when electrons with high energy strike the anode block, which leads to the emission of secondary and backscattered electrons. In addition, the PIC simulation for a 12-cavity MDO also shows when secondary electron emission occurs, the boundary for neighboring modes becomes more complicated than before. Replacing tapered cavities by single-stepped cavities in a relativistic MDO increases the interaction space where the charged particles interact with the induced RF waves. The electronic efficiency of the A6 relativistic MDO as well as the 12-cavity MDO with single-stepped cavities driven by the transparent cathode can be over 70% with gigawatts output power level. And with single-stepped cavities, the distance between the cathode and the wall of relativistic MDO is increased such that the possibility for electrons with high energy striking on the wall is decreased, which results in less emission of secondary and backscattered electrons under the same applied voltage. The PIC simulation demonstrated that in the 12-cavity MDO with single-stepped cavities driven by the transparent cathode with 400-kV applied voltage, the electrons with above 500 eV from cathode under the crossed electromagnetic field can strike on the anode block of MDO, resulting in a secondary and backscattered electron current that can cause different modes to be prevalent or stop the designed mechanism from working. Especially when applied with short voltage pulse with 10-ns duration, the output power pulse is shorted with peak power lowered. The simulation results presented in this paper possibly provide references for multicavity resonator when considering mode selection or mode switching experiments.

Experiments on a Segmented Axial Relativistic Magnetron Fed by a Split Cathode

An Advanced Relativistic Magnetron Operating with a Split Cathode and Separated Anode Segments

Experimental Research on a Split-Cathode-Fed Magnetron Driven by Long High-Voltage Pulses

Efficient Relativistic Magnetron With a Split Cathode

Experimental investigation of relativistic magnetron

Modeling and optimization of a relativistic magnetron with transparent cathode and output mode

Preliminary Experimental Research on Split-Cathode-Fed Relativistic Magnetron With Bidirectional Emission Structure

Stimulated Generation of Magnetrons powered below the Self-Excitation Threshold Voltage

Extracting millimeter-wavelength radio emission from a relativistic magnetron

To the vacuum conditions that provided the process of electromagnetic waves generated by a relativistic magnetron

Operation Characteristics of A6 Relativistic Magnetron Using Single-Stepped Cavities with Axial Extraction

Particle-in-Cell Simulations of Relativistic Magnetron with Axial Symmetrical Split Output

A Study of Electron Dynamics in a Split-Cathode Coaxially Within an Anode

Operation Characteristics of 12-Cavity Relativistic Magnetron with Single-Stepped Cavities

Operation Characteristics of a 12-Cavity Relativistic Magnetron when Considering Secondary and Backscattered Electrons’ Emission

A6 Relativistic Magnetron Using a Single-Step Cavity with Diffraction Output

Particle-In-Cell Simulations of High Efficiency 12-Vanes 2.45 GHz Continuous Wave Magnetron

S -Band GW-Level Relativistic Magnetron Operating at Relatively Low Applied Voltage

An Efficient Inverted Relativistic Magnetron With Virtual Cathode

Internal-locking relativistic magnetron in transversely opposed driven scheme

A 12-Cavity Relativistic Magnetron With Optimized Design Of Diffraction Output