Abstract:This study presents a new fiber reinforced polymer tube/filling strengthening method (i.e., FRP tube/filling strengthening) that creates a new composite compression member with a novel mechanical behavior, "bilinear behavior." Previous experimental and theoretical studies have been conducted based on the ultimate state of the section. To thoroughly study the stiffness and entire loading process of this novel member, finite element analysis (FEA) models are built in this paper. First, the model development process considers the initial defections and interface properties, and these models are verified by the experimental results. Two models of typical load-axial displacement curves describe the experimental results: a Bilinear model and a Trilinear model. Second, finite element modeling (FEM) is used to conduct a parametrical analysis that considers 7 parameters, and the results identify the mechanism of the strengthened member. Specifically, the Bilinear model corresponds to an unreinforced or relatively weakly reinforced specimen, and the Trilinear model corresponds to a relatively strongly reinforced specimen. If the exterior restraint system is weak, then the core steel buckles and subsequently yields; this behavior is described by the Bilinear model. If the exterior restraint system is strong (e.g., the length or the bending stiffness of the exterior restraint system is great), then the specimen can continue to bear a higher force after steel yielding until elastic-plastic buckling occurs; this behavior is described by the Trilinear model. Third, the FEA results and previous experimental and theoretical studies are used to obtain the stiffness and load-axial displacement curves, which are helpful for the design process. In general, relatively accurate FEA models are built in this paper that are capable of describing the mechanical behaviors of the novel member.

Analysis-oriented Model for FRP Tube-Confined Concrete: 3D Interpretation of Biaxial Tube Behaviour

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Analysis-oriented Stress–strain Models for FRP–confined Concrete

Theoretical Model for Slender FRP-confined Circular RC Columns

Compressive Behavior of Small-Diameter Concrete-Filled Fiber-Reinforced Polymer Tubes As Internal Reinforcements

Behavior of Recycled Brick Block Concrete-Filled FRP Tubes under Axial Compression

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Study on Behaviors of FRP Confined Stub Concrete Filled Square Steel Tubes under Axial Load

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Analytical Model of Circular CFRP Confined Concrete-Filled Steel Tubular Columns under Axial Compression

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

Analysis-oriented Models for FRP-confined Concrete: 3D Interpretation and General Methodology

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

Experimental and Analytical Study of Hollow Section Concrete-Filled GFRP Tubes in Bending

Behavior Analysis of FRP Tube/filling Strengthened Steel Members under Axial Compression

Theoretical Model for Fiber-Reinforced Polymer-Confined Concrete

Three-dimensional finite element modeling and theoretical analysis of concrete confined with FRP rings

Axial compressive performance and prediction models of confined concrete cylinders made of BFRP-PVC composite tubes

Analysis Of Frp-Strengthened Concrete-Filled Steel Tubular Columns Under Axial Compression

Experimental Study on Axial Compressive Behavior of Concrete-Filled FRP Filament-winded Tubes