Abstract:Currently, fast-melting SBS (Styrene-Butadiene-Styrene)-modified asphalt is widely used in pavements. However, in practical applications, complex environmental factors accelerate the deterioration of asphalt material properties, significantly affecting the service life of roads during their operational period. This study aims to examine the effects of complex environmental factors, including thermal oxidation, ultraviolet radiation, and various concentrations of salt solutions, on the high and low-temperature rheological properties of fast-melting SBS-modified asphalt (abbreviated as SBS-T-modified asphalt). Pressure aging–ultraviolet aging coupling and pressure aging–ultraviolet aging different concentration salt solution coupling were selected as the aging groups to simulate complex environmental conditions. Additionally, base asphalt and pressure-aged asphalt were used as control groups. The rheological properties of SBS-T-modified asphalt were evaluated using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR). The results indicate that multiple-factor coupling aging reduces both the high-temperature and low-temperature performance of SBS-T-modified asphalt compared to single-factor aging, although the impact on rheological properties is not consistent across all conditions. After the combined effects of UV aging and pressure aging, the rutting resistance and high-temperature performance of SBS-T-modified asphalt are most severely impacted. However, when coupled with salt-solution aging, the rutting resistance of SBS-T-modified asphalt improves, with the complex modulus increasing by approximately 30%. This indicates that the presence of the salt solution enhances the high-temperature performance of the asphalt. An analysis of the low-temperature rheological properties of SBS-T-modified asphalt based on Burgers model shows that the low-temperature rheological performance of SBS-T-modified asphalt worsens under three-factor coupling aging compared to two-factor or single-factor aging, leading to poorer crack resistance. Notably, after adding salt solutions, the thermal sensitivity of SBS-T-modified asphalt increases significantly, with the ΔTc value decreasing approximately sixfold for every 2% increase in salt concentration.

Influence of salt dissolution on durable performance of asphalt and Self-ice-melting asphalt mixture

Investigation of Long-Term Performance and Deicing Longevity Prediction of Self-Ice-Melting Asphalt Pavement

Study on the Long-Term Salt Release Characteristics of Self-Melting Ice Asphalt Mixtures and Their Impact on Pavement Performance

Investigation of the Microcharacteristics of Asphalt Mastics under Dry–Wet and Freeze–Thaw Cycles in a Coastal Salt Environment

Study on Performance Deterioration of Asphalt and Asphalt Mixtures Containing Mafilon under Internal Salt Freeze-Thaw Cycles

Evaluation of Performance Deterioration Characteristics of Asphalt Mixture in Corrosion Environment Formed by Snow-Melting Agents

Evaluation of road performance and adhesive characteristic of asphalt binder in salt erosion environment

Performance Deterioration of Asphalt Mixture under Chloride Salt Erosion

Rheology Deterioration and Damage Evaluation of SBS Modified Asphalt Under Two Salt Erosion Modes

Study on self-healing performance of asphalt under sodium salt erosion

The effect of sea salt solution erosion on cohesion, chemical and rheological properties of SBS modified asphalt

Research on the Rheological Performance of Fast-Melting SBS-Modified Asphalt under Complex Environmental Factors

Study on Performance Damage and Mechanism Analysis of Asphalt under Action of Chloride Salt Erosion

Research on Self-melting Snow Material of Asphalt Pavement

Influence of Deicer on Water Stability of Asphalt Mixture under Freeze–Thaw Cycle

Low-Temperature Crack Resistance of High-Content Rubber-Powder-Modified Asphalt Mixture under Freeze–Thaw Cycles

Research on Performance Deterioration of Internally Cured Pavement Concrete under the Coupling Effect of Salt Freeze-Thaw

Effect of Salt Solution Environment on the Aging of Styrene−Butadiene−Styrene (SBS)-Modified Asphalt

Impact of Temperature Changes and Freeze—Thaw Cycles on the Behaviour of Asphalt Concrete Submerged in Water with Sodium Chloride

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Degradation of SMA-13 low-temperature performance under coupled dry and wet-salt corrosion