Abstract:Ultra-high-performance concrete (UHPC) holds great promise for constructing lightweight and high-performance concrete structures. Hence, the proportion of live load increases, in turn, leads to a higher live-to-dead load ratio. UHPC structures suffer from cyclic stress amplitude in higher possibility. Therefore, the behavior and constitutive model of UHPC under cyclic tensile loading is of significance for the understanding of bearing capacity and deformation property for structures subjected to cyclic loading, which, nevertheless, is seldomly reported. In this regard, the present study conducted direct tensile tests on 35 UHPC dog-bones with four steel fiber volume fractions (i.e., 0%, 1%, 2%, and 3%) and two fiber shapes (i.e., straight and hooked-end). A constitutive model for UHPC under tensile loading was proposed, implemented into OpenSees, and employed in numerical simulations of UHPC beams subjected to bending in cyclic loading. The numerical results were compared with test results on UHPC beams for model verification. The experimental and numerical results show that the UHPC with straight fiber volume fractions less than 1% demonstrated a brittle failure, whereas the UHPC with straight fiber volume fractions higher than 1% or with a hooked-end fiber volume fraction of 2% exhibited a ductile failure. The increase in fiber volume fraction resulted in great enhancements of the initial crack and peak stresses, and the peak and ultimate strains, and the energy absorption capacity. Besides, the use of hooded-end fibers also led to a slight improvement in tensile strain behavior of UHPC but negatively affected the initial crack stress and peak stress. It also provided sufficient bonding between fiber and matrix. The envelope curves and failure patterns for UHPC under monotonic and cyclic loading are close. The proposed constitutive model for UHPC under tensile loading is composed of an envelope curve that is assumed bi-linear for strain softening UHPC or tri-linear for strain hardening UHPC, an unloading curve and a reloading curve described by an exponential function, and a damage index defined as the reduction of unloading modulus. The proposed constitutive model for UHPC under tensile loading can provide acceptable results for the prediction of the bearing capacity and deformation property of UHPC beams without reinforcements subjected to bending in cyclic loading.

Multi-scale Fiber Bridging Constitutive Law Based on Meso-Mechanics of Ultra High-Performance Concrete under Cyclic Loading

Multi-Scale Fibering Bridging Constitutive Law Based on Meso-Mechanics of Ultra High-Performance Concrete under Cyclic Loading

Behavior and Constitutive Model of Ultra-High-performance Concrete under Monotonic and Cyclic Tensile Loading

Cyclic tensile behavior of ultra-high performance concrete with hybrid steel-polypropylene fiber: Experimental study and analytical model

A mesomechanics-based analysis on the flexural behavior of ultra-high-performance concrete (UHPC) with different steel fiber lengths

Constitutive Behavior of Ultra-High-performance Steel Fiber Reinforced Concrete under Monotonic and Cyclic Tension

Experimental Investigation On The Damage Behavior Of Ultra-High Performance Concrete Subjected To Cyclic Compression

Multi-Axial Dynamic Constitutive Model Of Ultra High Performance Concrete

Experimental and Numerical Research of Ultrahigh Performance Concrete Layered Shell Element Based on a Two-Dimensional Fixed Crack Model

Study on the Dynamic Fracture Mechanical Properties of Ultra High-Performance Concrete under the Influence of Steel Fiber Content

Microstructure-based prediction of UHPC?s tensile behavior considering the effects of interface bonding, matrix spalling and fiber distribution

Constitutive Model for Ultra-High Performance Concrete (UHPC) Considering the Size Effect under Cyclic Compressive Loading

Uniaxial Tensile Response and Tensile Constitutive Model of Ultra-High Performance Concrete Containing Coarse Aggregate (CA-UHPC)

Ultra-High-Performance Concrete Crack Propagation Based on Fiber Random Distribution Model

Lattice Discrete Particle Modeling of the Cycling Behavior of Strain-Hardening Cementitious Composites with and Without Fiber Reinforced Polymer Grid Reinforcement

Investigation of fatigue crack propagation behavior in steel fiber-reinforced ultra-high-performance concrete (UHPC) under cyclic flexural loading

Constitutive Behavior of Hybrid Fiber Reinforced Concrete Subject to Uniaxial Cyclic Tension: Experimental Study and Analytical Modeling

Crack Propagation Behavior of Ultra-High-performance Concrete (UHPC) Reinforced with Hybrid Steel Fibers under Flexural Loading

Mechanical performance of steel-polypropylene hybrid fiber reinforced concrete subject to uniaxial constant-amplitude cyclic compression: Fatigue behavior and unified fatigue equation

Behavior of Ultra-High-performance Concrete under Combined Tensile and Bending Action

Improvement of boundary effect model in multi-scale hybrid fibers reinforced cementitious composite and prediction of its structural failure behavior