Abstract:Aiming to investigate the impact of cross-sectional size on the close-in blast performance of reinforced concrete (RC) beams, the local damage features and structural responses of RC beams with varying cross-sectional widths and depths subjected to close-in explosions were investigated experimentally and numerically. Experiments were conducted on ten RC beams with a cross-sectional size of 25 cm × 12.5 cm to study the influence of scaled distance and charge mass on the local damage size and structural responses (displacement and reaction force). The results indicate that the blasting face damage to tested beams, such as the crushing crater of concrete cover and side peeling-off damage, is more sensitive to the scaled distance (intensity of applied blast loads) compared to the rear spalling damage. And the peak reaction force exhibited a gradual increase within the range of 0.5 m/kg 1/3 , eventually reaching an average maximum value of 93.5 kN, and remained unchanged after the scaled distance was greater than 0.5 m/kg 1/3 , indicating that the dynamic load-carrying capacity of tested beams increased with the increasing scaled distance and the maximum dynamic load-carrying capacity of these beams is around 93.5 kN. Furthermore, a numerical model of RC beams subjected to close-in explosions was established based on the Fluid-Structure-Interaction (FSI) method. For validation, the local damage morphology and sizes of RC beams and their dynamic responses (displacement and reaction force) were computed and compared with the corresponding experimental results, concluding that the numerical results are in good agreement with the experimental findings. A parametric analysis was conducted to study the impact of cross-sectional size on the development process of initial local damage, stress distribution in cross sections, local damage sizes, and structural responses. Moreover, a damage index of the dynamic load-carrying capacity was derived from the relationship between the normalized maximum reaction force and the normalized maximum displacement to assess the damage degree of RC beams with varying cross-sectional sizes. This work can serve as a partial reference for relevant research.

The Damage Response of RC Columns with Considering Different Longitudinal and Shear Reinforcement under Demolition Blasting

Investigation on Damage Mechanism of RC Column under Close-in Explosion

Experimental Investigation into the Close-in Blast Performance of RC Columns with Axial Loading

Behavior of Reinforced Concrete Beams and Columns Subjected to Blast Loading

A method for controlling the blasting effect of reinforced concrete columns

Improved SDOF and numerical approach to study the dynamic response of reinforced concrete columns subjected to close-in blast loading

Blast performance of RC columns with different levels of concrete grades and reinforcing ratios

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Failure Analysis and Damage Assessment of RC Columns under Close-In Explosions

Residual axial capacity of circular reinforced concrete columns subjected to contact explosions

Damage Features and Dynamic Response of RC Beams under Blast

Experimental and Numerical Study on the Dynamic Response of RC Slabs under Blast Loading

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Analysis on nonlinear dynamic responses and failure modes of RC columns under blast loads

Dynamic vulnerability assessment and damage prediction of RC columns subjected to severe impulsive loading

Large Deflection Behavior Effect in Reinforced Concrete Columns Exposed to Extreme Dynamic Loads

Experimental and Numerical Analysis of CFRP Strengthened RC Columns Subjected to Close-in Blast Loading

Damage Assessment of RPC Strengthened RC Columns Subjected to Blast Loading

Close-in blast performance of RC beams with varying cross-sectional sizes and damage assessment based on the dynamic load carrying capacity

Time-History Blast Response And Failure Mechanism Of Rc Columns Using Lagrangian Formulation

Performances of the RC Column under Close-in Explosion Induced by the Double-End-initiation Explosive Cylinder