Abstract:Water splitting and chemical fuel production as a promising carbon-neutral energy solution relies critically on an efficient electrochemical process over catalyst surfaces. The fundamentals within the surface redox pathways, including the complex interactions of mobile ions and electrons between the bulk and the surface, along with the role of adsorbates and electrostatic fields remain yet to be understood quantitatively. This work presents a detailed kinetics study and nonstoichiometry characterization of Ce0.5Zr0.5O2-delta (CZO), one of the most recognized catalysts for water splitting. The use of CZO leads to >60% improvement in the kinetic rates as compared with undoped ceria with twice the total yield at 700 degrees C, resulting from the improved reducibility. The peak H-2 production rate is 95 yrnol g(-1) s(-1) at 700 degrees C, and the total production is 750 jtmol g(-1). A threshold temperature of 650 degrees C is required to achieve significant H2 production at fast rates. The redox kinetics is modeled using two-step surface chemistry with bulk-to-surface transport equilibrium. Kinetics and equilibrium parameters are extracted, and the model predictions show good agreement with the measurements. The enthalpy of bulk defect formation for CZO is found to be 262 kJ/mol, >40% lower than that of undoped ceria. As oxygen vacancy is gradually filled up, the surface H2O splitting chemistry undergoes a transition from exothermic to endothermic, with the crossover around = 0.04 to 0.05, which constrains the further ion incorporation process. Our kinetics study reveals that the H2O splitting process with CZO is kinetics limited at low temperature and transitions to partial-equilibrium with significantly enhanced backward reaction at high temperature. The charge-transfer step is found to be the rate-limiting step for H2O splitting. The detailed kinetics and nonstoichiometric equilibria should be helpful in guiding the design and optimization of CZO as a catalyst, oxygen storage material, as well as oxygen carrier for water-splitting applications.

Platinum Group Metal Catalyst (RuO<sub><i>x</i></sub>, PtO<sub><i>x</i></sub>, and IrO<sub><i>x</i></sub>)-Decorated Ceria-Zirconia Solid Solution as High Active Oxygen Carriers for Solar Thermochemical CO<sub>2</sub> Splitting

Platinum Group Metal Catalyst (RuO x , PtO x , and IrO x )-Decorated Ceria-Zirconia Solid Solution as High Active Oxygen Carriers for Solar Thermochemical CO 2 Splitting

Platinum Group Metal Catalyst (RuOx, PtOx, and IrOx)-Decorated Ceria-Zirconia Solid Solution as High Active Oxygen Carriers for Solar Thermochemical CO2 Splitting

Reactivity of Ni, Cr and Zr Doped Ceria in CO2 Splitting for CO Production Via Two-Step Thermochemical Cycle

Enhanced Intermediate-Temperature CO2 Splitting Using Non-Stoichiometric Ceria and Ceria-Zirconia

Redox Kinetics of Ceria-Zirconia (Ce1-Xzrxo2-δ) for Thermochemical Partial Oxidation of Methane and H2O/CO2 Splitting at Moderate Temperature

Boosted Solar Thermochemical Low‐temperature CO2 Splitting On Pt/CeO2 By Interface Catalysis

Catalytic Function of Irox in the Two-Step Thermochemical Co2-Splitting Reaction at High Temperatures

Solar Fuels Production: Two-step Thermochemical Cycles with Cerium-Based Oxides

Reactivity and stability of Zr-doped CeO2 for solar thermochemical H2O splitting in combination with partial oxidation of methane via isothermal cycles

Investigation on the Activity of Ni Doped Ce 0.8 Zr 0.2 O 2 for Solar Thermochemical Water Splitting Combined with Partial Oxidation of Methane

Reactivity and Efficiency of Ceria-Based Oxides for Solar CO2 Splitting Via Isothermal and Near-Isothermal Cycles

New Insights Into The Dynamics That Control The Activity Of Ceria-Zirconia Solid Solutions In Thermochemical Water Splitting Cycles

Thermochemical Activity of Single- and Dual-Phase Oxide Compounds Based on Ceria, Ferrites, and Perovskites for Two-Step Synthetic Fuel Production

Redox Kinetics and Nonstoichiometry of Ce0.5zr0.5o2-Delta for Water Splitting and Hydrogen Production

Two-step thermochemical looping using modified ceria-based materials for splitting CO2

Thermochemical CO2 Splitting Reaction with CexM1−xO2−δ (M = Ti4+, Sn4+, Hf4+, Zr4+, La3+, Y3+ and Sm3+) Solid Solutions

Two-step Thermochemical Looping Using Modified Ceria-Based Materials for Splitting CO 2

Ni/CexZr1-xO2 catalyst prepared via one-step co-precipitation for CO2 reforming of CH4 to produce syngas: role of oxygen storage capacity (OSC) and oxygen vacancy formation energy (OVFE)

A Review of Solar Thermochemical CO2 Splitting Using Ceria-Based Ceramics With Designed Morphologies and Microstructures

Preparation of Heterostructured Cu-CeO2/SrTiO3 Catalysts by Rapid Plasma Exsolution for Photothermal Reverse Water Gas Shift Reaction