Transition Metal and Nitrogen-Doped Mesoporous Carbons As Cathode Catalysts for Anion-Exchange Membrane Fuel Cells
Jaana Lilloja,Elo Kibena-Põldsepp,Ave Sarapuu,Maike Käärik,Jekaterina Kozlova,Päärn Paiste,Arvo Kikas,Alexey Treshchalov,Jaan Leis,Aile Tamm,Vambola Kisand,Steven Holdcroft,Kaido Tammeveski
DOI: https://doi.org/10.1149/ma2022-01351521mtgabs
2022-07-15
ECS Meeting Abstracts
Abstract:Energy is an essential part of our lives and causes significant impact on the environment. As hydrogen is clean, cost-efficient and easily producible, then it is believed to become an essential player in the energy field. 1 The proton exchange membrane fuel cells fueled by hydrogen are already used in the transport sector, but their further commercialization is limited by the excess usage of precious metals. To ease the search for replacements, the harsh acidic environment can be changed to alkaline, thus giving opportunity to use non-precious metal catalysts. 2 Especially for the cathodic oxygen reduction reaction (ORR), different transition metal-containing nitrogen-doped carbon-based materials have shown great promise. 3 This gives an opportunity for the rise of anion exchange membrane fuel cells (AEMFCs) as future hydrogen-based energy devices. 2,3 In this work, a novel catalyst support based on mesoporous carbon (MPC, from Pajarito Powder, LLC) is used to produce M−N−C type catalyst materials. Such mesoporous structure is useful for better mass transport in the catalyst layer during AEMFC operation. This MPC support is mixed with 1,10-phenanthroline as nitrogen source and transition metal acetates, followed by high-temperature pyrolysis at 800 °C in an inert atmosphere. Five M-N-C materials are prepared with the following transition metal combinations: Co, Fe, CoFe, CoMn, and FeMn. Several physico-chemical characterization methods (SEM-EDX, STEM, XPS, MP-AES, Raman spectroscopy, and N 2 physisorption) are employed to study the materials. These indeed proved that all five catalyst materials have feasible mesoporous structure (pore diameters predominantly 7-8 and 25-35 nm) and the doping with transition metals (content ca. 1 wt%) and nitrogen (ca. 2.3 at%) has been a success. The electrochemical testing to study the ORR pathway and activity of these materials in alkaline media was done using the RRDE method. CoFe-N-MPC, Fe-N-MPC and FeMn-N-MPC catalysts showed similar and excellent electrocatalytic performance by obtaining half-wave potential of 0.9 V vs RHE. The lowest peroxide yield was obtained with Fe-N-MPC and FeMn-N-MPC. The latter two catalyst materials also showed very good performance as cathode catalysts in an H 2 /O 2 AEMFC together with an HMT-PMBI 4 membrane, obtaining peak power density of >470 mW cm –2 . This indicates that the M-N-MPC materials are promising cathode catalysts for the AEMFC application.