Abstract:The autonomous control of landing procedures can provide the efficiency and precision that are vital for the successful, safe completion of space operations missions. Controlling a lander with this precision is challenging because the propellants, which will be expended during the operations, represent a significant fraction of the lander's mass. The mass variation of each tank profoundly influences the inertia and mass characteristics as thrust is generated and complicates the precise control of the lander state. This factor is a crucial consideration in our research and methodology. The dynamics model for our lander was developed where the mass, inertia, and center of mass (COM) vary with time. A feed-forward neural network (NN) is incorporated into the dynamics to capture the time-varying inertia tensor and COM. Moreover, the propellant takes time to travel through the feed lines from the storage tanks to the engine; also, the solenoid valves require time to open and close. Therefore, there are time delays between the actuator and the engine response. To take into account these sources of variations, a combined time delay is also included in the control loop to evaluate the effect of delays by fluid and mechanisms on the performance of the controller. The time delay is estimated numerically by a Computational Fluid Dynamics (CFD) model. As part of the lander's control mechanism, a thrust vector control (TVC) with two rotational gimbals and a reaction control system (RCS) are incorporated into the dynamics. Simple proportional, integral, and derivative (PID) controllers are designed to control the thrust, the gimbal angles of the TVC, and the torque required by the RCS to manipulate the lander's rotation and altitude. A complex mission with several numerical examples is presented to verify the hover and rotational motion control.

Attitude-trajectory Coupled Control of Mars Pinpoint Landing Using Nonlinear Model Predictive Control

Model Predictive Control Guidance for Constrained Mars Pinpoint Landing

Path Following of Autonomous Surface Vehicles with Line-of-sight and Nonlinear Model Predictive Control

Nonlinear Model Predictive Path Tracking Control for Autonomous Vehicles Based on Orthogonal Collocation Method

Semi-Analytical Planetary Landing Guidance with Constraint Equations Using Model Predictive Control

Trajectory Optimization For Planetary Multi-Point Powered Landing

A New Method of Rapid Trajectory Optimization for Mars Pin-Point Landing

Adaptive Guidance and Control of Uncertain Lunar Landers in Terminal Landing Phases

Robust guidance amd control of lunar lander using model reference approach

Research for Nonlinear Model Predictive Controls to Laterally Control Unmanned Vehicle Trajectory Tracking

Powered-descent Trajectory Optimization Scheme for Mars Landing

Mars Landing Feedback Guidance for Non-Concave Trajectory Construction

Multi-constrained feedback guidance for mars pinpoint soft landing using time-varying sliding mode

Fixed-time Pinpoint Mars Landing Using Two Sliding-Surface Autonomous Guidance

Optimal nonlinear feedback guidance algorithm for Mars powered descent

A nonlinear model predictive control based control method to quadrotor landing on moving platform

Robust Guidance and Control of Lunar Lander Using Model Reference Approach

Real-time Motion Planning and Trajectory Tracking in Complex Environments Based on Bézier Curves and Nonlinear MPC Controller

Receding Horizon-Based Dual Control Strategy for Pinpoint Planetary Landing

Guiding Lunar Landers: Harnessing Neural Networks for Dynamic Flight Control with Adaptive Inertia and Mass Characteristics

Concurrent Learning-Based Trajectory Tracking Control of a Novel Multi-Node Flexible Lander for Asteroid Missions