Abstract:ABSTRACT In this paper, a design procedure of a compact broadband microstrip diplexer working on the Very High Frequency (VHF)/Ultrahigh Frequency (UHF) band is proposed. The diplexer consists of a fourth‐order Butterworth Low‐Pass Filter (LPF) and a sixth‐order elliptic High‐Pass Filter (HPF). The two filters are located on two substrates with a common ground. A microstrip‐to‐coaxial structure is utilized to transmit the power flow between the two substrates. For miniaturization, the utilized ideal capacitors and inductors are realized by the commercial lumped‐element capacitors and the curved microstrip line sections, respectively. All the middle design and rapid optimization processes from the schematic simulation by Advanced Design System (ADS) to the circuit simulation by CST STUDIO SUITE (CST) are given in the article. A prototype is fabricated and measured. The testing results are consistent with the simulation. The diplexer can operate at 225–775 and 880–2500 MHz. The insertion losses are 0.8 ± 0.3 and 0.9 ± 0.4 dB in the two working bandwidths. The isolation bandwidth of −20 dB level is as small as 105 MHz. The roll‐off is also sharp that the related bandwidths corresponding to the attenuation level −3 to −20d B are 90 and 30 MHz to the high and low bands, respectively. Besides, the return loss and isolation are larger than 10 and 20 dB approximately. The diplexer has a volume of 0.065 λ g × 0.156 λ g @775 MHz, which can be utilized to feed the miniaturized broadband VHF/UHF antenna system.

Compact Quad‐channel Diplexer Design Using Dual‐band Bandpass Filters with Multiple Transmission Zeros

Compact Quad-Band Bandpass Filter Using Double-Diplexing Structure

Compact Switchable Bandpass Filter and Its Application to Switchable Diplexer Design

DESIGN OF COMPACT QUAD-CHANNEL DIPLEXER USING QUAD-MODE STUB-LOADED RESONATORS

Design of quad-channel diplexer using short stub loaded resonator

Design of A Compact Quad-channel Diplexer using Stepped-Impedance Resonators

Compact Microstrip Diplexer Based on a Novel Coupling Topology

A Compact Diplexer Composed Of Quarter-Wavelength Resonators For Ultra-Wideband (Uwb) System

A Switchable Diplexer Using Switchable Impedance Matching Circuit Technique

Dual-Plane Quadruplexer Using Common Lumped-Element Quadruple-Mode Resonator

Design of Miniaturized Dual-Band Low-Pass–Bandpass and Bandpass Filters

Compact High Isolation Quad-Band Bandpass Filter Using Quad-Mode Resonator

A Compact G-Band Diplexer Based on Quasi-Elliptical Filter

Design of A Compact Diplexer Using Microstrip and Slotline Dual-Mode Resonators

Design of miniaturized ultra-wide stopband lowpass-bandpass diplexer using hexagon-shaped resonators

Novel Diplexer with Improved Isolation Using Asymmetric Transmission Zeros Technique

Compact Dual-Band Bandpass Filter and Diplexer Using Hybrid Resonant Structure with Independently Controllable Dual Passbands

Compact Low-Loss Diplexer with Stacked 2D and 3D Structures Using 3D Glass-Based Advanced Packaging Technology

Design and Rapid Optimization Procedure of a Compact Broadband Microstrip Diplexer for VHF/UHF Band

Compact Diplexer with High Isolation and Wide Stopband Based on SIRs

Wideband Diplexer with Narrow Channel Spacing Using Hybrid Bandpass-Bandstop Structures.