Abstract:In petroleum storage tanks, sulfur-containing crude oil continues to corrode equipment, generating sulfur corrosion products such as FeS. These products exhibit rapid exothermic reactions upon contact with air, thereby increasing the risk of fires and explosions. Additionally, sulfur monomers precipitated from sulfur or other compounds present in crude oil can adhere to FeS, consequently altering its spontaneous combustion characteristics. To explore the impact of associated sulfur content on the spontaneous combustion characteristics of FeS during its formation, this research synthesized FeS and its sulfur mixtures with sulfur concentrations of 5%, 10%, 15%, and 20%. These mixtures were prepared using a liquid-phase method, which involved the synthesis of self-made active FeS followed by the addition of different sulfur components. Differences in the spontaneous combustion characteristics of the five groups of samples were investigated in stages by simultaneous thermal analysis. The trends of the characteristic parameters of spontaneous combustion of FeS with different percentages of sulfur-containing components were analyzed. Finally, the apparent activation energy values of FeS with FeS and its associated sulfur were calculated by using thermodynamic analysis in the room-temperature spontaneous combustion stage (RT-75°C) and high temperature combustion stage (160–250°C). The findings indicate that the presence of sulfur components enhances the reactivity of FeS, yet reduces its oxygen absorption saturation threshold, thus advancing the oxygen absorption endpoint and facilitating entry into the high-temperature combustion stage. Moreover, FeS and its associated sulfur exhibit prolonged sustained combustion times when the sulfur component percentage is below 10%, favorably influencing the combustion behavior of FeS. As the percentage of sulfur component increases (from 10% to 20%), the combustion duration temperature rises from 60°C to 95°C. Additionally, an increase in the percentage of sulfur component (from 10% to 20%) leads to a higher combustion temperature. The activation energies of the five samples were determined using the Flynn-Wall-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) kinetic methods. During the room temperature spontaneous combustion stage, the activation energy increases from 65.05 kJ/mol to 112.44 kJ/mol as the percentage of sulfur component rises from 0% to 20%. During the high temperature combustion stage, the activation energy increased from 108.32 kJ/mol to 214.49 kJ/mol with the increase in the percentage of sulfur component. FeS and its associated sulfur necessitate energy to propel the process due to heat absorption from the melting of sulfur monomers. As the reaction progresses into the high temperature stage, the required activation energy escalates accordingly.

Surface Deposit Formation of Sulfur Compounds in Both Air-Saturated and Oxygen-Free Aviation Fuels

Kinetic Modeling of Surface Deposition for Air-Saturated and Oxygen-Free Aviation Fuels

Experimental investigation on carbon deposition characteristics of aeroengine swirl nozzle and its effect on spray behaviors

Pressure Effect on the Surface Deposition of Aviation Fuel in a Heat Exchange Tube

Ash Aerosol Formation from Oxy-Coal Combustion and Its Relation to Ash Deposit Chemistry

Kinetic Modeling of Thermal Oxidation and Coking Deposition in Aviation Fuel

Experimental and Numerical Study on Oxidation Deposition Properties of Aviation Kerosene

Morphological and Compositional Analysis on Thermal Deposition of Supercritical Aviation Kerosene in Micro Channels

Fundamental study of jet fuel oxidative deposit formation

Impact of sulfur functional groups on physicochemical properties and oxidation reactivity of diesel soot particles

Secondary Flow and Oxidation Coking Deposition of Aviation Fuel

Influences of Sulfur-Containing Components on the Key Phases of FeS Spontaneous Combustion Dynamics

Molecular characteristics of sulfur compounds in oxidative desulfurization for heavy fuel oil based on APPI FT-ICR MS analysis

Swirling Flame Combustion of Heavy Fuel Oil: Effect of Fuel Sulfur Content

Flow Pattern Effects on the Oxidation Deposition Rate of Aviation Kerosene

Biologically produced elemental sulfur clogging induced by thiols in gas biodesulfurization systems

Effects of adding n-amyl alcohol, dimethylfuran to fuel on soot formation in aviation kerosene diffusion flame

Oxidizing-gas-based Passivation of Pyrophoric Iron Sulfides

Fuel Injector Deposits in Direct-Injection Spark-Ignition Engines

Exploring the formation mechanisms of internal diesel injector deposits: A laboratory study

Investigation of the Deposition Characteristics of Ammonium Bisulfate and Fly Ash Blend Using an On-Line Digital Image Technique: Effect of Deposition Surface Temperature