Abstract:To explore the distinction between generation atmosphere of fuel NOx and thermal NOx in an ammonia-hydrogen compound fuel engine, a numerical calculation model was established based on a detailed ammonia-hydrogen oxidation mechanism. The combustion process and NOx evolution mechanism of the ammonia-hydrogen compound fuel engine under different intake conditions were studied. The research results for different equivalence ratios show that the in-cylinder hydrogen volume is the primary factor influencing the initial heat release. When the equivalence ratio is between 0.89 and 1.14, the mixture exhibits a higher combustion rate, leading to a shorter CD and an earlier CA50. At this point, the heat release process closer to TDC contributes improving engine combustion efficiency and indicated efficiency. Therefore, when the equivalence ratio is between 0.89 and 1.00, combustion efficiency is higher than 98% and indicated efficiency is higher than 43%, the ammonia-hydrogen compound fuel engine achieves relatively higher economy. Both over-rich and over-dilute mixtures induce an enhancement of fuel NOx, while the higher in-cylinder temperature caused by stoichiometric combustion leads to a boom of thermal NOx. Consequently, the total NOx emission from the ammonia-hydrogen compound fuel engine is higher at equivalence ratios between 0.80 and 1.00, and the NOx emission reaches its peak at an equivalence ratio of 0.89. Analysis of the evolution process of key N components in the cylinder shows that incomplete combustion plays a significant role in fuel NOx emissions, while thermal NOx emissions are mainly influenced by the distribution of in-cylinder components and combustion temperature. Specifically, thermal NOx emissions primarily depend on the in-cylinder components distribution in the narrow equivalence ratio range around stoichiometric ratio, and are significantly affected by in-cylinder temperature under other conditions. The in-cylinder oxygen concentration significantly affects fuel NOx emissions under most operating conditions. Further optimization of intake temperature shows that combustion efficiency exceeds 90% when the intake temperature is above 280 K. When the intake temperature reaches 310 K, the combustion efficiency reaches up to 98%, thus an intake temperature of about 310 K is sufficient to meet the need for improving the combustion efficiency of ammonia-hydrogen compound fuel engine. To achieve high efficiency and lower NOx emissions, appropriate lean combustion combined with an intake temperature slightly above room temperature is recommended.

Numerical study on combustion and emission characteristics of a spark-ignition ammonia engine added with hydrogen-rich gas from exhaust-fuel reforming

Numerical Investigation of a Heavy Duty Compression Ignition Engine Converted to Ammonia Spark Ignition Operation

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Computational Analysis of Ammonia-Hydrogen Blends in Homogeneous Charge Compression Ignition Mode of Engine Operation

Visualization and simulation study of ammonia blending with hydrogen as combustion application in lean-burn condition

Numerical study of the combustion process and NOx evolution mechanism of ammonia-hydrogen compound fuel engine under different intake conditions

Numeral study of the mixture formation and combustion process of an ammonia/hydrogen rotary engine

Effect of Burning Ammonia/Hydrogen Blended Fuel on Engine Combustion and Emission Performance

Experimental study on the effect of hydrogen substitution rate on combustion and emission characteristics of ammonia internal combustion engine under different excess air ratio

Characteristics of Fuel-Borne Nitrogen Pollutants in Hydrogen-Ammonia Mixtures Using Argon-Oxygen Atmosphere under Engine Conditions

Nitrogen Oxides Emission Characteristics of Zero-Carbon Ammonia-Hydrogen Fuels for Internal Combustion Engines

Study on lean combustion of ammonia-hydrogen mixtures in a pre-chamber engine

Numerical Investigation of Engine Performance and Emission Characteristics of an Ammonia/Hydrogen/n-Heptane Engine Under RCCI Operating Conditions

Improving thermal efficiency of an ammonia-diesel dual-fuel compression ignition engine with the addition of premixed low-proportion hydrogen

An Evaluation of the Conversion of Gasoline and Natural Gas Spark Ignition Engines to Ammonia/Hydrogen Operation From the Perspective of Laminar Flame Speed

Combustion and Emission Characteristics of a Spark Ignition Engine Fueled with Ammonia/gasoline and Pure Ammonia

Effects of intake parameters and compression ratio on ammonia combustion and emissions in SI engines

Hydrogen Production from Ammonia-Rich Combustion for Fuel Reforming under High Temperature and High Pressure Conditions

Experimental Study on Ammonia-Methanol Combustion and Emission Characteristics in a Spark Ignition Engine

Numerical investigation of the hydrogen, ammonia and methane fuel blends on the combustion emissions and performance