Abstract:Since they were first commercialized by SONY in 1991, lithium-ion batteries (LIBs) have played a vital role in the translational development of portable electronics and the electrification of transportation, which has re-shaped our lives dramatically. However, there is an increasing concern regarding the resilience of supplying raw ingredients for LIB production, including the uneven distribution of lithium in the world (≈40% in South America) and there being a naturally insufficiently low amount in the Earth's crust (0.0017 wt%), the unethical sourcing of Co from the Democratic Republic of Congo, as well as the availability of graphite in only a few regions globally, predominantly in China. These concerns are further compounded by the slow implementation of recycling strategies at a relevant industrial scale. Although the ‘conventional’ LIBs will likely continue to play a critical role in our sustainability roadmap towards Net Zero emissions, it is highly desirable to explore future sustainable battery technologies to diversify the battery market and satisfy a variety of demands in energy storage and mobility as well as to ease the dependency on critical materials. Guided by the above vision, this Special Issue of ‘Beyond Lithium: A New Era of Sustainable Energy Engineering’ scopes the interdisciplinary research towards novel electrochemical energy conversion and storage technologies, with the aim to further the fundamental understanding of disruptive structure–property relationships in new battery chemistries. Apart from emphasizing these developments, this issue particularly highlights technical remits from the realization of frontier electrochemical energy storage systems (i.e., metal and metal-ion battery technologies (Na, K, Ca, Al, Zn, etc.), solid-state batteries, dual/multiple-ion batteries, flow batteries, etc.) and novel battery recycling strategies toward a circular economy. 1. The frontier electrochemical energy storage system. Lithium–oxygen/air (Li–O/Li–air) batteries, lithium–sulphur (Li–S) and lithium–selenium (Li–Se) batteries are a group of redox batteries sharing the advantages of ultra-high capacity, long cycling life, environmental friendliness and low cost due to the use of S and/or Se cathode materials. But their intrinsic limitations such as low conductivity and S/Se shuttle effect, etc., have been major hurdles in this research field. Earth-abundant elements able to replace lithium as the cation have been discovered, including sodium (Na), potassium (K), magnesium (Mg), calcium (Ca), zinc (Zn) and aluminium (Al), however, most of these battery systems are under early-stage development at a relatively low Technical Readiness Level (TRL). Every component within those batteries is under discovery for performance improvement to reach a level with the potential to replace LIBs, for instance, sodium-ion batteries (SIBs) and potassium-ion batteries (KIBs), have been recently identified as emerging technologies to supplement or even replace LIBs, especially in the applications of large-scale energy storage, with hugely reduced cost and relatively competitive cycling performance and capacity retention thanks to the Na and K metals’ similar properties to Li. The electrolyte and its additives for aqueous zinc-ion batteries (ZIBs) have also been reviewed in this collection to provide future directions and insights for ZIB’ commercialization. Novel energy conversion and storage approaches are helpful add-ons, such as thin-film energy-harvesting systems, liquid metal–based energy systems, to diversify the energy supply/distribution as per regional needs. The above approaches are all promising in the development of frontier electrochemical energy storage systems. 2. Battery recycling strategies and the circular economy approach. While new discoveries and breakthroughs in battery technologies heavily underpin the research into energy storage technologies (high energy density and cycling performance), low cost and sustainability toward a circular economy approach enables an effective recycling strategy for Li-ion batteries as well as a promising alternative to extend the life cycle of the technologies and their precious resources. Research in such emerging battery technologies is a multi-faceted subject, therefore, a special issue in this area is timely and will encompass significant advances made in this crucially important research field. It is reported that a very small portion of batteries are currently being recycled worldwide, with some claims as low as 5%; it is imperative that we look at ways to increase this number through a combination of increasing the ease, speed, and profitability of the process. There are many areas of battery recycling that are of great importance, now more than ever as the amount of batteries increases. Currently it is estimated that 80% of a battery can be recycled, but very limited successful cases in Li battery recycling have been proven economically friendly: a sustainable Li-battery life cycle remains yet to be achieved. Finally, we anticipate this collection of papers encompassing the research of frontier energy materials to effectively address the challenge toward the Net Zero emissions goal. We gratefully appreciate the support from the whole editorial team of Small and the reviewers. We would also like to take this opportunity to thank all authors who contributed to this collection. Ben Bin Xu (FRSC, FIMMM, FRSA) is a Professor of Materials and Mechanics in the Department of Mechanical and Construction Engineering at Northumbria University, UK. Ben obtained his Ph.D. in Mechanical Engineering (2011) at Heriot-Watt University in Edinburgh, then moved to the University of Massachusetts, Amherst (US, 2011–2013) to work as postdoc on a NSF project. Since joining Northumbria in 2013, Ben has established a multidisciplinary research group with diverse interests in energy materials and technology, materials chemistry, responsive materials/surface, soft matter, mechanics and micro-engineering. Yinzhu Jiang is a professor at School of Materials Science and Engineering in Zhejiang University, China. He received his Ph.D. degree from Department of Materials Science and Engineering from University of Science and Technology of China in 2007. He worked as a post-doctoral researcher in Heriot-Watt University, UK from 2007 to 2008 and an Alexander von Humboldt Fellow in Bielefeld University, Germany from 2008 to 2010. His research interests focus mainly on energy- related materials and electrochemistry, including rechargeable batteries, metal anodes, and solid electrolytes. Terence Xiaoteng Liu is an Associate Professor and research group lead of Renewable Energy Technology and Materials group in Department of Mechanical and Construction Engineering, Faculty of Engineering and Environment, Northumbria University. He has extensive research experience in novel energy materials and electrocatalysts for advanced batteries, fuel cells, environmental remediation, etc. Terence's current research lies in materials and systems for energy generation and storage applications. Zaiping Guo received a Ph.D. in Materials Engineering from the University of Wollongong in 2003. She joined The University of Adelaide as a Professor in 2021. Her research focuses on the design and application of electrode and electrolyte materials for energy storage and conversion, including rechargeable batteries, hydrogen storage, and fuel cells. Her research achievements have been recognized through numerous awards, including NSW Premier's Prizes for Science & Engineering (2020), ARC Queen Elizabeth II Fellowship (2010), ARC Future Fellowship (FT3, 2015), ARC Laureate Fellowship (2021), and the Clarivate Analytics Highly Cited Researcher Award (2018-2020). Guihua Yu (FRSC, FInstP, FIAAM) is William Murray Professor of Materials Science and Mechanical Engineering at The University of Texas at Austin, affiliated with Texas Materials Institute and UT Energy Institute. Yu received B.S. degree with the highest honors from USTC, Ph.D. from Harvard University, followed by postdoc at Stanford. His research has been focused on rational design and synthesis of nanoarchitected polymeric materials and hybrid organic–inorganic nanomaterials, fundamental understanding of their chemical and physical properties, and exploration of their technologically important applications in energy, environment, and sustainability. Maria Magdalena Titirici received her Ph.D. from the University of Dortmund. She then completed a postdoc and later became a group leader at the Max-Planck Institute of Colloids and Interface. She held positions at Queen Mary University of London between 2013 and 2019, first as a reader and then full professor. She is currently a chair in Sustainable Energy Materials at Imperial College London and RAEng Chair in Emerging Technologies. Her research is in the field of sustainable materials for energy storage and conversion.

Abstract:Advanced Functional MaterialsVolume 29, Issue 41 1970285 Frontispiece Free Access Cancer Therapy: Highly Efficient In Vivo Cancer Therapy by an Implantable Magnet Triboelectric Nanogenerator (Adv. Funct. Mater. 41/2019) Chaochao Zhao, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorHongqing Feng, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorLijun Zhang, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190 P. R. ChinaSearch for more papers by this authorZhe Li, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorYang Zou, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorPuchuan Tan, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorHan Ouyang, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorDongjie Jiang, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorMin Yu, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorChan Wang, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorHu Li, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorLingling Xu, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorWei Wei, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190 P. R. ChinaSearch for more papers by this authorZhou Li, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. China Center on Nanoenergy Research, School of Physical Science and Technology, Guangxi University, Nanning, 530004 P. R. ChinaSearch for more papers by this author Chaochao Zhao, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorHongqing Feng, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorLijun Zhang, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190 P. R. ChinaSearch for more papers by this authorZhe Li, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorYang Zou, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorPuchuan Tan, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorHan Ouyang, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorDongjie Jiang, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorMin Yu, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorChan Wang, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorHu Li, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorLingling Xu, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. ChinaSearch for more papers by this authorWei Wei, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190 P. R. ChinaSearch for more papers by this authorZhou Li, CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083 P. R. China School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049 P. R. China Center on Nanoenergy Research, School of Physical Science and Technology, Guangxi University, Nanning, 530004 P. R. ChinaSearch for more papers by this author First published: 07 October 2019 https://doi.org/10.1002/adfm.201970285Citations: 7 AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onEmailFacebookTwitterLinked InRedditWechat Abstract In article number 1808640, Wei Wei, Zhou Li, and co-workers develop an electric field-controlled drug delivery system based on triboelectric nanogenerators and red blood cells for cancer treatment. Accelerated release of the drug occurs only when the electric field is generated by a magnet triboelectric nanogenerator. Highly efficient cancer therapy of the drug delivery system is demonstrated both in vitro and in vivo. Citing Literature Volume29, Issue41Special Issue: Nanogenerators and Piezotronics – A Special Issue of the Beijing Institute of Nanoenergy and NanosystemsOctober 10, 20191970285 RelatedInformation

Self-powered Sensing Technologies for Human Metaverse Interfacing

Beyond Lithium: A New Era of Sustainable Energy Engineering

Advances in Wearable and Implantable Bioelectronics for Precision Medicine

In Situ Transmission Electron Microscopy for Energy Applications

Wearable Biochemical Sensors for Human Health Monitoring: Sensing Materials and Manufacturing Technologies

Advanced Biomaterials Research in China

Multi‐interface Engineering of MXenes for Self‐Powered Wearable Devices

“Soft Shorts” Hidden in Zinc Metal Anode Research

Research and Application Progress in Wearable Electrochemical Biosensors

Introducing Engineered Science

Self-powered wearable IoT sensors as human-machine interfaces

Current development of stretchable self-powered technology based on nanomaterials toward wearable biosensors in biomedical applications

Surface Functionalization, Bioanalysis, and Applications: Progress of New Magnetoelastic Biosensors

Cancer Therapy: Highly Efficient in Vivo Cancer Therapy by an Implantable Magnet Triboelectric Nanogenerator (adv. Funct. Mater. 41/2019)

Bioinspired nanomaterials for wearable sensing and human-machine interfacing

Wearable Mechanical and Electrochemical Sensors for Real-Time Health Monitoring

Home-Made, Self-Powered, Skin-Attachable Sensing Platform for Diverse Vital Sign Monitoring

Multi‐Interface Engineering of MXenes for Self‐Powered Wearable Devices (Adv. Mater. 42/2024)

Accurate photovoltaic measurement of organic cells for indoor applications

Intelligent Fibers and Textiles for Wearable Biosensors

Recent Progress in Self-Powered Skin Sensors