Abstract:Bismuth (Bi) is a promising anode candidate for sodium ion batteries (SIBs) with a high volumetric capacity (3765 mA h cm-3) and moderate working potential but suffers from large volume change (ca. 250%) during the sodiation/desodiation process, resulting in pulverization of the electrode, electrical contact loss, excessive accumulation of solid electrolyte interfaces, etc., devastating the cycling stability of the electrode seriously. Addressing this issue significantly relies on rational micro- and nano-structuring. Herein, we prepared a 3D multi-layered composite assembly of Bi/carbon heterojunctions with 0D bismuth nanospheres distributed and anchored on 2D nitrogen-doped carbon nanosheets (NCSs), using a preorganization strategy by taking full advantage of the strong complexation ability of Bi3+. The multi-layered composite assembly is periodic and close-packed, with Bi nanospheres <25 nm, carbon nanosheets ∼30 nm, and an average interlayer space of ∼75 nm. Such a specific architecture provides abundant electrochemically active surfaces and ion migration channels as the Bi nanospheres are attached to the 2D nitrogen-doped carbon nanosheets via a point-to-surface pattern. Moreover, the mono-layer Bi nanospheres oriented along the 2D-surface of NCSs are kinetically favorable for the recognition of Na+ by the active sites of Bi nanospheres as well as for avoiding the long distance migration of Na+ (external diffusion of Na+). Furthermore, thermodynamically, the small size and high surface energy of ultrasmall Bi nanospheres could contribute to high ion mobility (internal diffusion of Na+) and promote electrochemical reactions as well. The multi-layered composite assembly of Bi@NCSs (ML-Bi@NCSs) not only provides a robust 3D framework guaranteeing the whole structural stability but also ensures direct and full contact of each active nano-building block with electrolyte, thereby forming a high-throughput electron/ion transport system. When evaluated as the anode for SIBs, ML-Bi@NCSs deliver superior high-rate capability up to 30 A g-1 (specific capacity: 288 mA h g-1) and long-term cycling stability (capacity retention: 95.8% after 5000 cycles at 10 A g-1 and 90.6% after 10 000 cycles at 20 A g-1, respectively).

In-situ Synthesis of Bi Nanospheres Anchored in 3D Interconnected Cellulose Nanocrystal Derived Carbon Aerogel As Anode for High-Performance Mg-ion Batteries

Bimetallic Bi–Sn Micro-/Nanospheres@cellulose Nanocrystal Derived Carbon Aerogel Composite Anode for High-Performance Mg-ion Batteries

Rayleigh-Instability-Induced Bismuth Nanorod@Nitrogen-Doped Carbon Nanotubes As A Long Cycling and High Rate Anode for Sodium-Ion Batteries

Achieving High Initial Coulombic Efficiency for Competent Na Storage by Microstructure Tailoring from Chiral Nematic Nanocrystalline Cellulose

Bi nanoparticles encapsulated in nitrogen-doped carbon as a long-life anode material for magnesium batteries

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Low Temperature Carbonization of Cellulose Nanocrystals for High Performance Carbon Anode of Sodium-Ion Batteries

Submicrospherical and Porous Bi<sub>2</sub>S<sub>3</sub> Protected by Nitrogen-doped Carbon for Practical Anode Fabrication of Li-ion Batteries

Highly Reversible Mg Insertion in Nanostructured Bi for Mg Ion Batteries.

Facile Galvanic Replacement Construction of Bi@C Nanosheets Array As Binder‐Free Anodes for Superior Sodium‐Ion Batteries

MXene-reinforced Sb@C nanocomposites with synergizing spatial confinement architecture enabled ultra-stable and fast lithium ion storage

Amorphous carbon-encapsulated Si nanoparticles loading on MCMB with sandwich structure for lithium ion batteries

Bismuth nanoparticles confined in multi-walled carbon nanotubes toward enhanced sodium storage anodes

Carbon-coated BiOCl/Bi heterojunction flowerlike microspheres for collaboratively boosting storage magnesium performance

A Multi-Layered Composite Assembly of Bi Nanospheres Anchored on Nitrogen-Doped Carbon Nanosheets for Ultrastable Sodium Storage

Chemically Integrated Multiwalled Carbon Nanotubes/Zinc Manganate Nanocrystals As Ultra Long-Life Anode Materials for Lithium-Ion Batteries

Hierarchical Bismuth–Carbon Microfoam Hybrid Structure Achieves Superior Sodium-Ion Storage

Interlayer-Expanded MoS 2 /N-Doped Carbon with Three-Dimensional Hierarchical Architecture as a Cathode Material for High-Performance Aluminum-Ion Batteries

Novel Bismuth Nanoflowers Encapsulated in N‐Doped Carbon Frameworks as Superb Composite Anodes for High‐Performance Sodium‐Ion Batteries

Fabrication of Nano-Solid Spherical Nb 2 O 5 /Nitrogen-Doped Carbon Composite for High-Performance Sodium-Ion Battery Anodes

In Situ Anchoring Anion‐Rich and Multi‐Cavity NiS 2 Nanoparticles on NCNTs for Advanced Magnesium‐Ion Batteries