Abstract:Surface electropulsing treatment has been demonstrated to significantly improve the surface strength of electron beam melted (EBM) Ti-6Al-4V alloy. However, further investigation is needed to understand the effect of this treatment on the surface texture of the alloy, as the texture of Ti alloy plays a crucial role in its corrosion performance. In this study, we explored the changes in texture induced by surface electropulsing in EBM Ti-6Al-4V alloy using electron backscattered diffraction (EBSD) and micro-region X-ray diffraction (Micro-XRD). The results revealed that surface electropulsing created a 〈0001〉 α′ //transverse direction (TD) texture on the alloy surface, and the intensity of this texture remained unaffected with varying electropulsing time (180–240 ms). Additionally, this treatment led to the formation of long curved martensite laths that could cross the small angle prior-β grain boundaries. The finite element method (FEM) was employed to aid in the analysis of the texture evolution mechanism. The results revealed that the most rapid cooling rate occurred perpendicular to the contact surface with the copper electrode, along the building direction (BD). When the (0001) plane aligned parallel to the direction of the fastest cooling rate, it promoted the growth of martensite, leading to an increased production of martensite with the (0001) plane parallel to the BD direction and generating the 〈0001〉 α′ //TD texture. Therefore, by controlling the position of the copper electrode during surface electropulsing treatment, it is possible to manipulate the orientation of the (0001) plane of most α′ laths. This suggests that surface electropulsing treatment holds potential for application in other Ti alloys to enhance strength and optimize texture for biomedical applications.

Effect of Electropulsing on Anisotropy in Strength of Laser Metal Deposited Ti−6Al−4V Alloy

Variant Selection Induced by Electropulsing: Optimization in the Microstructure of Selective Laser Melted Ti-6Al-4 V Alloy

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of a Deformed ZrTiAlV Alloy

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

Mechanical properties and strengthening mechanisms of Ti-6Al-4V treated by electro-pulsing assisted laser shock peening

Constructing a Novel Bi-Lamellar Microstructure in Selective Laser Melted Ti-6Al-4V Alloy Via Electropulsing for Improvement of Strength and Corrosion Resistance

A Novel Electropulsing Treatment to Improve the Surface Strength and Repair the Pore of Additively Manufactured Ti-6Al-4V Alloy

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

A shortened process of tri-modal microstructure developing in Ti-6Al-4V alloy via electropulsing-induces grain spheroidization

Influence mechanism of microstructure variation on mechanical properties of laser melting deposition Ti–6Al–4V alloy under electroshocking treatment

Retracted: Effects of High-Energy Electro-Pulsing Treatment on Microstructure, Mechanical Properties and Corrosion Behavior of Ti-6al-4v Alloy (retracted Article. See Vol.90, Pg.781, 2018)

Effect of Recovering Damage and Improving Microstructure in the Titanium Alloy Strip under High-Energy Electropulses

Surface electropulsing-induced texture evolution in electron beam melted Ti-6Al-4V alloy for biomedical application

Microstructural Evolution and Stress State Related to Mechanical Properties of Electron Beam Melted Ti-6Al-4V Alloy Modified by Laser Shock Peening

Microstructure evolution and electroplasticity in Ti64 subjected to electropulsing-assisted laser shock peening

Laser shock peened Ti-6Al-4 V alloy: Experiments and modeling

Influence of Electroshocking Treatment on Microstructure and Mechanical Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Thin-Wall Specimen Manufactured by Laser Melting Deposition

RETRACTED: Effects of High-Energy Electro-Pulsing Treatment on Microstructure, Mechanical Properties and Corrosion Behavior of Ti–6Al–4V Alloy

Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of Intermetallic Al3ti Alloy

RETRACTED: Influence of Electropulsing Globularization on the Microstructure and Mechanical Properties of Ti–6Al–4V Alloy Strip with Lamellar Microstructure