Abstract:The narrow working temperature range due to the sharp magnetic entropy change vertical bar Delta S-M vertical bar peak and large thermal or magnetic hysteresis restricts the practical application of magnetocaloric materials. In this work, the table-like magnetocaloric effect (MCE) was obtained in the multilayer composite of Fe88-xNdxCr8B4 alloys with various Nd substitutions for Fe (x=5, 8, 10, 12, and 15), which were prepared by arc-melting followed by melt-spinning. The substation of Nd was found to enhance the glass-forming ability. For the alloys with Nd substitution from 5 at% to 15 at%, the Curie temperature (T-C) ranged from 322 K to 350 K and the peak value of vertical bar Delta S-M vertical bar remained almost constant, 3.4-3.5 J/(kg K) under an applied held of 0-5 T The composite with various Nd contents was prepared by stocking the ribbons layer by layer. The vertical bar Delta S-M vertical bar of the composite approached a nearly constant value of similar to 3.2 J/(kg K) in a held change of 0-5 T in a wide temperature span over 40 K, resulting in large refrigerant capacity value of >408 J/kg. This vertical bar Delta S-M vertical bar value was much larger than the previous reported Fe-based amorphous composite Fe78-xCexSi4Nb5B12Cu1. This composite can be used as the working material in the Ericsson-cycle magnetic regenerative refrigerator around room temperature. (C) 2015 Elsevier B.V. All rights reserved.

Magnetocaloric Effect of the Fe87M8B5 (M = Zr, Ce) Amorphous Alloys

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Comnsb: A Magnetocaloric Material with A Large Low-Field Magnetic Entropy Change at Intermediate Temperature

The Effect of RE (re=pr, Ce) Substitution on Formability, Magnetic and Magnetocaloric Properties of the Fe88Zr2Ti2Nd4B4 Amorphous Alloy

Excellent Magnetocaloric Properties near 285 K of Amorphous Fe88Pr6Ce4B2 Ribbon

Achieving table-like magnetocaloric effect and large refrigerant capacity around room temperature in Fe78−xCexSi4Nb5B12Cu1 (x=0–10) composite materials

Magnetic and Magneto-Caloric Properties of the Amorphous Fe<sub>92-x</sub>Zr<sub>8</sub>B<sub>x</sub> Ribbons

Thermal, Magnetic and Magnetocaloric Properties of Fe80−M B10Zr9Cu1 (M = Ni, Ta; X= 0, 3, 5) Amorphous Alloys

Mechanism for Improved Curie Temperature and Magnetic Entropy Change in Sm-Doped Fe88Zr8B4 Amorphous Alloys

Improved magnetocaloric effects in AlFe2B2 intermetallics through the enhancement of magnetoelastic coupling

Magnetocaloric Effect in Tb(Co0.94Fe0.06)2 Alloy with Negligible Thermal Hysteresis and Wide Working Temperature Range

Effect of Co Substitution on Thermal Stability and Magnetocaloric Effects of Gd70Al20Fe10−x Co X Amorphous Alloys

Table-like Magnetocaloric Effect of Fe88−xNdxCr8B4 Composite Materials

Magnetic and Magneto-Caloric Properties of the Amorphous Fe92−xZr8Bx Ribbons

The Effect of Fe Addition on the Curie Temperature and Magnetic Entropy of the Gd45Co50Al5 Amorphous Alloy

The magnetic, structural properties and magnetocaloric effects of Fe-Mn-Al alloys

Magnetic Properties and Large Magnetocaloric Effects in Amorphous Gd-Al-Fe Alloys for Magnetic Refrigeration

Elastocaloric Effect and Magnetic Properties of Rare Earth Ce-Doped Cu-Al-Mn Alloy

Magnetocaloric Effect of Gd55Fe30P15 Amorphous Ribbons

Observation of Superior Magnetocaloric Performance in Multicomponent (Ce0.71pr0.07nd0.22)2fe17-Xalx (x = 0.6, 0.8) Compounds

Magnetocaloric properties of melt-spun MnFe-rich high-entropy alloy