Abstract:Objec Optical frequency combs (OFC) consist of a series of evenly spaced discrete spectral components that maintain high spectral coherence. It can be applied in many fields, such as metrology, spectroscopy, optical arbitrary waveform generation, THz generation, microwave photonics, and optical communications. Among the available optical comb technologies, OFC based on semiconductor lasers provides suitable combs with competitive costs and efficiency. Vertical-cavity surface-emitting laser (VCSEL) is a single-longitudinal mode semiconductor laser. Compared with an edge emitter, VCSEL has some advantages, such as on-wafe test capability, lower energy consumption, lower manufacturing cost, and circular output beam. VCSEL can emit in two orthogonal linear polarization modes. Polarization switching between these modes can be found when changing the temperature or bias current applied to the VCSEL. These properties make them appropriate for OFC generation. Dual-polarization OFCbased VCSEL can be generated due to the special polarization properties. Further efforts are required to improve OFC-based on VCSEL, especially to expand the optical span while maintaining the existing advantages. In this study, we proposed a scheme for generating broadband dual-polarization OFC based on a 1550-nm VCSEL under optoelectronic feedback, opening perspectives for polarization-sensitive sensing and multicarriers optical sources for polarization-division multiplexing optical communications. Methods We proposed and analyzed theoretically a scheme for generating a 500-GHz dual-polarization optical frequency comb based on a 1550-nm VCSEL under optoelectronic feedback. Besides, we numerically investigated the influences of optoelectronic feedback parameters on the performances of the generated optical frequency comb. The proposed model considered the optoelectronic feedback based on the rate equations of the spin-flip model of 1550-nm VCSEL. First, we proposed a schematic diagram of a broadband dual-polarization OFC generation based on a 1550-nm VCSEL under optoelectronic feedback. Then, we analyzed the output power versus normalized bias current curves of the two modes with orthogonal polarizations of the free-running 1550-nm VCSEL that is without optoelectronic feedback. After that, optoelectronic feedback effects on the polarization dynamics of 1550-nm VCSEL under different optoelectronic feedback parameters are theoretically investigated using the spin-flip model. In the next step, we analyzed the time series and optical spectra of the two linear polarization modes with orthogonal directions of 1550-nm VCSEL under a certain normalized bias current and optoelectronic feedback time with different optoelectronic feedback coefficient values. In addition, we analyzed the optical and power spectra of the two linear polarization mode outputs of 1550-nm VCSEL with different optoelectronic feedback coefficients. Results and Discussions The results showed that two linear polarization modes with orthogonal directions of the 1550-nm VCSEL under optoelectronic feedback can be controlled by adjusting the optoelectronic feedback parameters. When the bias current or optoelectronic feedback parameters are changed under 1550-nm VCSEL, the polarization conversion of the Y- and X-polarization occurs (Fig. 3). Besides, we obtained that the dual-polarization optical frequency comb with Y- and X-polarization can be achieved under certain conditions of optoelectronic feedback parameters (Fig. 4). Within a certain range of optoelectronic feedback parameters, the optical spectral bandwidth of the Y- and X-polarization optical frequency comb increases with an increase in optoelectronic feedback coefficient ( Fig. 5), and the corresponding power spectrum becomes flatter with an increase in optoelectronic feedback coefficient (Fig. 6). By adjusting the optoelectronic feedback coefficient and time, we obtained broadband dual-polarization optical frequency comb with flat spectral lines, pure comb lines. The spectral widths of the Y- and X-polarization optical frequency combs were more than 250 and 500 GHz within the amplitude range of 10 dB, respectively (Fig. 5) Conclusions In this study, we proposed and analyzed theoretically a novel scheme for generating a 500-GHz dual polarization optical frequency comb based on a 1550-nm VCSEL under optoelectronic feedback. It is shown that two orthogonal linear polarization optical frequency combs can be obtained and have comparable span and power under certain optoelectronic feedback conditions. The 10 -dB spectral width of optical frequency combs of the Y- and X polarization larger than 250 and 500 GHz can be achieved in the 1550-nm VCSEL subject to optoelectronic feedback under certain optoelectronic feedback parameter conditions, respectively. An appropriate increase in optoelectronic feedback coefficient in 1550-nm VCSEL can increase 10 -dB spectral width. This increase is essential for enhancing the performance of OFCs generated by 1550-nm VCSEL under optoelectronic feedback for polarization-sensitive sensing and polarization-division multiplexing optical communications.

Broadband and Tunable Optical Frequency Comb Based on 1550 Nm Verticalcavity Surface-Emitting Laser under Pulsed Current Modulation and Optical Injection

Generation Of Broadband Optical Frequency Comb Based On A Gain-Switching 1550 Nm Vertical-Cavity Surface-Emitting Laser Under Optical Injection

Generation of tunable and broadband optical frequency comb based on gain-switching vertical-cavity surface emitting laser driven by square wave signal under optical injection

Generation of Two-Channel Broadband Optical Frequency Comb Using Gain-Switched 850 Nm-Vcsel under Orthogonal Optical Injection

Experimental Investigation on Wideband Optical Frequency Comb Generation Based on a Gain-Switched 1550 Nm Multi-Transverse Mode Vertical-Cavity Surface-Emitting Laser Subject to Dual Optical Injection

Broadband Optical Frequency Comb Generation Utilizing a Gain-Switched Weak-Resonant-Cavity Fabry–Perot Laser Diode under Multi-Wavelength Optical Injection

Experimental study of optical frequency comb generation in gain-switching vertical-cavity surface-emitting laser driven by various modulation signals under optical injection

Optical frequency comb generation based on spectral broadening of a phase locked dual-wavelength microcavity laser

A Flat and Broadband Optical Frequency Comb with Tunable Bandwidth and Frequency Spacing

Wavelength tunable broadband optical frequency comb generation based on a gain-switched weak-resonant-cavity Fabry-Perot laser diode subject to external optical injection

Flexible broadband optical frequency comb generation assisted by injection locking of semiconductor laser

Generation of 500-GHz Broadband Dual-Polarization Optical Frequency Comb

Tunable Broadband Mm-Wave Signal Generation Based Ona Injection Lock of Selected OFC Lines

Tunable and Broadband Microwave Frequency Comb Generation Using Optically Injected Semiconductor Laser Nonlinear Dynamics

Two-channel broadband optical frequency comb generation scheme by a gain-switched 850 nm-VCSEL under orthogonal optical injection

Optical Frequency Comb Generation from a 1.65 Μm Single-Section Quantum Well Laser.

Broadband Tunable Microwave Frequency Comb Generation Based on Modulated Optical Injection Semiconductor Laser

10-Ghz Broadband Optical Frequency Comb Generation at 1550/1310 Nm

Octave-spanning Frequency Comb Generation Based on a Dual-Mode Microcavity Laser

Broadband, high-power optical frequency combs covering visible to near-infrared spectral range

O-U Band Flat Optical Frequency Comb Generation Based on Dispersion-controlled Fluorotellurite Glass Fiber