Abstract:Understanding the physiochemical mechanisms that control the loss of gas during coring processes is critical to accurately determining gas-in-place (GIP) resource assessments of unconventional shale-gas plays. Our study uses an experimental approach, utilizing methane (CH4) adsorption isotherms and degassing curves of methane-resaturated Barnett Formation core plugs, to determine the amount of lost-gas based on mass-balance analysis at different CH4 re-saturation pressures and varied exposure times. Several readily available empirical methods for estimating lost-gas were evaluated, quantified, and compared with the mass balance–derived lost-gas values in our experiments.A CH4 isotherm measurement on 3/8-inch Barnett Formation core plugs was performed at 35.4 °C; the amount of gas adsorbed in excess was then quantified and fitted to the modified Langmuir equation to determine the Langmuir maximum, Langmuir constant, and adsorbed gas-phase density. Two sets of CH4 gas-resaturation and degassing measurements, one varying saturation pressures and the other varying exposure times, were performed on 3/8-inch Barnett Formation core-plugs at an isothermal temperature of 35.4 °C. Degassing curves, the plot of the released gas yield versus the square root of degassing time, display three stages that correspond to different gas-releasing mechanisms. The rapid increase of released gas yield at the beginning of degassing represents that nonlinear gas expansion is dominant and that degassing evolves into a linear desorption-dominated phase over time. Experimentally derived values for lost gas were determined by subtracting the sum of the desorbed and retained gas at the peak of the degassing curve from the amount of gas initially charged into the samples at equilibrated resaturation pressure. Lost gas varies linearly with increasing gas-resaturation pressure and nonlinearly by a greater magnitude with increasing exposure time, indicating that lost gas is more sensitive to exposure time.The uncertainty evaluation of lost gas determined by three empirical methods was conducted by direct comparison with mass-balance-derived lost-gas values from our experiment. Nonlinear least-squares extrapolation overestimates, and both linear extrapolation and polynomial equation fitting underestimate, mass-balance lost-gas control points. Among the three empirical methods, the polynomial-fitted lost-gas values most closely agree with mass-balance lost gas, revealing that polynomial fitting to degassing curves is a viable way to accurately estimate lost gas and, more importantly, to estimate GIP values with up to 85% accuracy. As free gas is the dominant storage mechanism in the Barnett Formation, the trends of experimentally measured cumulative desorbed gas content versus the square root of elapsed time match neither the calculated curves derived from USBM Direct Method nor Amoco Method.

Evaluation of Lost Gas in the Borehole Drilling Stage: Implication for the Direct Method of Coalbed Methane Content Determination

Interpretation Method for Lost Gas in Deep Coalbed and Its Application

Desorption-diffusion model and lost gas quantity estimation of coalbed methane from coal core under drilling fluid medium

Evaluation of gas contents for a multi-seam deep coalbed methane reservoir and their geological controls: In situ direct method versus indirect method

A Method to Evaluated Gas Content with Coalbed Methane Reservoir Based on Adsorption Theory and Production Analysis

Modeling of gas non-isothermal desorption-diffusion in deformed coal and application in lost gas calculation

Gas Desorption Characteristics of Coal Particles under Dynamic Temperature Changes: Implication for the Lost Gas Estimation During Borehole Coal Sampling

Coalbed methane gas content and its geological controls: Research based on seismic-geological integrated method

A dynamic evaluation technique for assessing gas output from coal seams during commingling production within a coalbed methane well: a case study from the Qinshui Basin

Experimental evaluation of the dynamic water-blocking effect in coalbed methane reservoir

Modeling of gas migration in a dual-porosity coal seam around a borehole: The effects of three types of driving forces in coal matrix

In-situ gas content evaluation of producing coalbed methane reservoirs based on electromagnetic radiation anomalies

A NOVEL METHOD FOR EVALUATING SHALE LOST GAS AMOUNT AND DESORPTION GAS AMOUNT BASED ON SEGMENTED VARIABLE BOUNDARY MODEL

Methane resaturation in Barnett Formation core plugs and new approach for determination of post-coring gas loss

A dynamic model of coalbed methane emission from boreholes in front of excavation working face: numerical model and its application

Dual-Porosity Coupled Borehole Gas Flow Model: A New Method for Inversion of Coal Seam Permeability

A Method for Evaluating Coalbed Methane Reservoir Productivity Considering Drilling Fluid Damage

Modeling and application of coalbed methane recovery performance based on a triple porosity/dual permeability model

An Analytical Method for Timely Predicting of Coal Seam Pressure during Gas Production for Undersaturated Coalbed Methane Reservoirs