Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Benzoquinone-intercalated Vanadium Oxide in the Electrolyte with Al3+ for Zinc-Ion Storage: Dual-Pillar Effect and Reversible Disorder–order Conversion

Long-lifespan Benzoquinone-Intercalated Vanadium Oxide with Vacancies and Disorders on the (00l) Facets for Efficient Sodium-Ion Battery: A Facile Approach to Na+ Capture and Pre-Sodiation

Redox-active benzoquinone-intercalated layered vanadate for high performance zinc-ion battery: phenol-keto conversion and the anchoring effect of V-O-V host framework

Anthraquinone-intercalated V2O5 with Al3+ for superior zinc-ion batteries: reversible transformation between disorder and order

Unravelling the role of benzoquinone intercalators on the aqueous zinc-ion storage performance toward vanadium pentoxide cathode

Al-doped hydrated V6O13 cathode materials with enhanced rate and cycling properties for aqueous zinc-ion batteries

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Cointercalation of Polyaniline and Alkali-Earth Cations into V2O5 to Boost Aqueous Zinc-Ion Storage Performance with Superior Cycling Stability

Anomalous Zn2+ Storage Behavior in Dual‐Ion‐In‐Sequence Reconstructed Vanadium Oxides

Drastically Promoting Rate Capability via Dual‐Cations Intercalation of V2O5 Enabling Rapid Zinc‐Ion Storage

Organic pillars pre-intercalated V4+-V2O5·3H2O nanocomposites with enlarged interlayer and mixed valence for aqueous Zn-ion storage

Li+, Na+ co-stabilized vanadium oxide nanobelts with bilayer structure for boosted Zinc-ion storage performance

Enhanced Electrochemical Performance and Cycling Stability of the (NH4)8[VIV12VV7O41(OH)9]·11H2O Cathode in Aqueous Zinc Ion Batteries

Discovering the Order-Disorder Transition in Quinoline Intercalated Vanadium Oxide with Superior Calcium Storage via Polyhedral Distortion

Optimized cyclic and electrochemical performance by organic ion N(CH3)4+ pre-inserted into N(CH3)4V8O20 cathode and hierarchy distributive Zn anode in aqueous zinc ion batteries

A novel 3-phenylpropylamine intercalated molecular bronze with ultrahigh layer spacing as a high-rate and stable cathode for aqueous zinc-ion batteries

Hydrogen Peroxide Tuned Morphology and Crystal Structure of Barium Vanadate‐Based Nanostructures for Aqueous Zinc‐Ion Storage Properties

Manipulating the d-band center of bimetallic molybdenum vanadate for high performance aqueous zinc-ion battery

Engineering VOx structure by integrating oxygen vacancies for improved zinc-ion storage based on cation-doping regulation with electric density

Aluminium Pre-Intercalated Orthorhombic V2O5 As High-Performance Cathode Material for Aqueous Zinc-Ion Batteries

Synergetic Effect of Mo-Doped and Oxygen Vacancies Endows Vanadium Oxide with High-Rate and Long-Life for Aqueous Zinc Ion Battery