Abstract:The behaviour of a granular material is primarily affected by its particle size distribution (PSD), which is not necessarily a soil constant as assumed in traditional soil mechanics. The PSD may change over time due to mechanical as well as environmental actions. In this study, a series of ring shear tests and one-dimensional compression tests were completed on carbonate sand, in both dry and saturated conditions. Samples were prepared with different initial uniform gradings, to investigate: (1) the influence of the saturation state and initial grading on mechanical and deformational behaviour of carbonate sands and (2) the evolution of the PSD as a result of breakage. The ring shear tests show that the residual friction angle remains almost constant, but dilatancy reduces with increasing saturation degree. In the one-dimensional compression test, the yield stress decreases with increasing saturation degree, but the compressibility (as defined by Cc) remains almost constant, irrespective of the saturation state. Moreover, saturated samples suffer more breakage than dry samples during ring shear tests, while there is no obvious effect of saturation state on particle breakage in one-dimensional compression. A recently proposed PSD model with only two parameters (λp and κp) is employed to model the evolution of PSD, as it can more broadly capture the whole PSD throughout the breakage process than existing breakage indices. Test results demonstrate that parameter λp is linearly related to Einav's breakage index \( B_{\text{r}}^{*} \) and is dependent on initial grading, but independent of test mode. Parameter κp is in power relationship with \( B_{\text{r}}^{*} \) and is independent of initial grading or test mode. The evolution of parameters λp and κp is related to the input work for both ring shear and compression tests, with λp being hyperbolically related to input work and κp in power relationship with input work. Using such an evolution law provides an alternative approach to capture the effects of particle breakage in constitutive models.

A Breakage Matrix Methodology to Predict Particle Size Evolution of Calcareous Sands

Experimental study on the gradation transition matrix of dyed carbonate sands during particle breakage

A Breakage Matrix Model for Calcareous Sands Subjected to One-Dimensional Compression

Image Analysis on Grain Kinematics and Grain Breakage of Carbonate Sands from South China Sea During Confined Compression

An approach to predict soil particle breakage and gradation evolution for carbonate sands

Study of particle breakage behaviour of calcareous sand by dyeing tracking and particle image segmentation method

Particle breakage of uniformly graded carbonate sands in dry/wet condition subjected to compression/shear tests

Detailed Amount of Particle Breakage in Nonuniformly Graded Sands under One-Dimensional Compression

A Stochastic Particle Breakage Model for Granular Soils Subjected to One-Dimensional Compression with Emphasis on the Evolution of Coordination Number

Quantifying the Morphology of Calcareous Sands by Dynamic Image Analysis

Particle-morphology-based characterization of the breakage behavior of particle assemblies under one-dimensional compression

Fracturing and Ultimate State of Binary Carbonate Sands

Detailed Amount of Particle Breakage in Multi-Sized Coral Sands under Impact Loading

Particle breakage mechanism and particle shape evolution of calcareous sand under impact loading

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Review of Particle Breakage Measurement Methods for Calcareous Sand

The evolution and influence of particle breakage on the compression behavior of calcareous sand

Experimental study on the mechanical behaviors and particle breakage characteristics of calcareous sand from South China Sea under repeated one-dimensional impacts

Effects of Particle Breakage on the Mechanical Behavior of Calcareous Sand Under Confined Compression Tests

Fractal Analysis of Particle Size and Morphology in Single-Particle Breakage Based on 3D Images

Quantifying the morphology of crushed sand particles using X-ray micro-tomography