Abstract:It is of significant theoretical and practical value to study the deposition process and deformation behavior of cold-sprayed particles to find the deposition mechanism of cold-sprayed coatings, further improve the coating performance, and expand its application scope. However, observing the deposition process and particle behavior through experiments is difficult due to the brief deposition duration of cold spray particles. Numerical simulation offers a means to slow the deposition process and predict the critical velocity, deformation behavior, bonding mechanism, and residual stress of cold-sprayed particles. This paper uses finite element analysis software, including ANSYS LS Dynamic-2022 R1 and ABAQUS-6.14, alongside various prevalent finite element methods for numerically simulating cold spray particle deposition. These methods involve the Lagrange, Euler, arbitrary Lagrange-Euler (ALE), and Smoothed Particle Hydrodynamics (SPH) to investigate the cold spray particle deposition process. The recent literature primarily summarizes the simulation outcomes achieved by applying these methodologies for simulating the deposition process and deformation characteristics of different particles under varying cold spraying conditions. In addition, the reliability of these simulation results is analyzed by comparing the consistency between the simulation results of single-particle and multi-particle and the actual experimental results. On this basis, these methods' advantages, disadvantages, and applicability are comprehensively analyzed, and the future simulation research work of particle deposition process and deformation behavior of cold spraying prospects is discussed. Future research is expected to provide a more in-depth study of the micro-mechanisms, such as the evolution of the inter-particle and internal organization of the particles, near the actual situation.

The Study of Slag Particle Deposition Process Based on Monte Carlo Simulation

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

A unified model of slagging particle deposition behavior with thermophoresis and dynamic mesh based on OpenFOAM

Numerical Simulation on the Deposition of Nanoparticles under Laminar Conditions

Numerical Simulation of Slag-collection Process in a Batch Slag-discharge System

Submodel for Predicting Slag Deposition Formation in Slagging Gasification Systems

Numerical Simulation on the Motion Behavior of Micro-inclusions at the Steel–Slag Interface

CFD-DEM Coupling Model for Deposition Process Analysis of Ultrafine Particles in a Micro Impinging Flow Field

Study on the Interaction of Sedimenting Cylindrical Particles in Still Fluid

Measurement and Simulation Validation of DEM Parameters of Pellet, Sinter and Coke Particles

Numerical Simulation of Molten Slag Deposition in Radiant Syngas Cooler with a CFD-Based Model

Experimental and numerical study on slag deposition in solid rocket motor

Monte Carlo Simulation of Particle Coagulation and Sintering

Experimental study of particle deposition characteristics in a gasifier: Effect of slag wall temperature

Simulation analysis of splat deposition in plasma spray forming

Numerical simulation on the deposition characteristics of MSWI fly ash particles in a cyclone furnace

Monte Carlo simulation of polydisperse particle deposition and coagulation dynamics in enclosed chambers

Study on the numerical simulation of laying powder for the selective laser melting process

The study of the separation and deposition of dredging soil slurry under physical disturbance

NUMERICAL SIMULATION OF PILEUP PROCESS IN METAL MICRODROPLET DEPOSITION MANUFACTURE

Research Progress on Numerical Simulation of the Deposition and Deformation Behavior of Cold Spray Particles