Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

A Hierarchical Manipulation Scheme for Robotic Sorting of Multiwire Cables with Hybrid Vision

Vision-Based Robotic Grasping and Manipulation of USB Wires.

Data‐Driven Modeling and High‐Precision Tracking Control of a Soft Continuum Manipulator: Enabling Robotic Sorting of Multiwire Cables

Cable Routing and Assembly using Tactile-driven Motion Primitives

Development of an automated system for the soldering of USB cables

Multi-Stage Cable Routing through Hierarchical Imitation Learning

Visual Tracking Control of Cable-Driven Hyper-Redundant Snake-Like Manipulator

A novel cable-grasping planner for manipulator based on the operation surface

Autonomously Untangling Long Cables

Cable manipulation with a tactile-reactive gripper

Multistage Cable Routing Through Hierarchical Imitation Learning

A Deep Learning-Based Autonomous RobotManipulator for Sorting Application

Development of Multi-Robotic Arm System for Sorting System Using Computer Vision

An Algorithm Based on Bidirectional Searching and Geometric Constrained Sampling for Automatic Manipulation Planning in Aircraft Cable Assembly

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Harnessing with Twisting: Single-Arm Deformable Linear Object Manipulation for Industrial Harnessing Task

A closed-loop bin picking system for entangled wire harnesses using bimanual and dynamic manipulation

Dual-Loop Control of Cable-Driven Snake-like Robots

Vision Based Cable Assembly in Constrained Environment.

Control Method for Robotic Manipulation of Heavy Industrial Cables

Robotic Manipulation Planning for Shaping Deformable Linear Objects WithEnvironmental Contacts.