Abstract:The development of perpetually powered sensor networks for environment monitoring to avoid periodic battery replacement and to ensure the network never goes offline due to power is one of the primary goals in sensor network design. In many environment-monitoring applications, the sensor network is internet-connected, making the energy budget high because data must be transmitted regularly to a server through an uplink device. Determining the optimal solar panel size that will deliver sufficient energy to the sensor network in a given period is therefore of primary importance. The traditional technique of sizing solar photovoltaic (PV) panels is based on balancing the solar panel power rating and expected hours of radiation in a given area with the load wattage and hours of use. However, factors like the azimuth and tilt angles of alignment, operating temperature, dust accumulation, intermittent sunshine and seasonal effects influencing the duration of maximum radiation in a day all reduce the expected power output and cause this technique to greatly underestimate the required solar panel size. The majority of these factors are outside the scope of human control and must be therefore be budgeted for using an error factor. Determining of the magnitude of the error factor to use is crucial to prevent not only undersizing the panel, but also to prevent oversizing which will increase the cost of operationalizing the sensor network. But modeling error factors when there are many parameters to consider is not trivial. Equally importantly, the concept of microclimate may cause any two nodes of similar specifications to have very different power performance when located in the same climatological zone. There is then a need to change the solar panel sizing philosophy for these systems. This paper proposed the use of actual observed solar radiation and battery state of charge data in a realistic WSN-based automatic weather station in an outdoor uncontrolled environment. We then develop two mathematical models that can be used to determine the required minimum solar PV wattage that will ensure that the battery stays above a given threshold given the weather patterns of the area. The predicted and observed battery state of charge values have correlations of 0.844 and 0.935 and exhibit Root Mean Square Errors of 9.2% and 1.7% for the discrete calculus model and the transfer function estimation (TFE) model respectively. The results show that the models perform very well in state of charge prediction and subsequent determination of ideal solar panel rating for sensor networks used in environment monitoring applications.

A Method for Monitoring the Solar Resources of High-Scale Photovoltaic Power Plants Based on Wireless Sensor Networks

IEE E P ro of 1 Combining Solar Energy Harvesting with 2 Wireless Charging for Hybrid Wireless 3 Sensor Networks

Combining Solar Energy Harvesting with Wireless Charging for Hybrid Wireless Sensor Networks

Wireless Sensor Network for Orchard Soil and Climate Monitoring.

Globally Optimizing Network Utility with Spatiotemporally-Coupled Constraint in Rechargeable Sensor Networks

Solar Wireless Sensor Network Routing Algorithm Based on Multi-Objective Particle Swarm Optimization

Application and Practice of High-Precision Solar Resource Monitoring Technology in Photovoltaic Power Plant Area

Design and analysis of a wireless monitoring network for transmission lines in smart grid

A Real-Time Monitoring System Based on ZigBee and 4G Communications for Photovoltaic Generation

Distributed Rate Control, Routing, and Energy Management in Dynamic Rechargeable Sensor Networks

Data Gathering Optimization by Dynamic Sensing and Routing in Rechargeable Sensor Networks

Resource Optimization in Wireless Sensor Networks

Operation State Scheduling Towards Optimal Network Utility in RF-Powered Internet of Things.

Wind-solar Hybrid Streetlights Monitoring System Networking Optimization

Poster Abstract: Solarmote - A Low-Cost Solar Energy Supplying And Monitoring System For Wireless Sensor Networks

Energy Management Strategy to Simplify the Hardware Structure of Wireless Sensor Nodes

Modeling, Metrics, and Optimal Design for Solar Energy-Powered Base Station System

Optimal Scheduling for Quality of Monitoring in Wireless Rechargeable Sensor Networks

New Techniques for Sizing Solar Photovoltaic Panels for Environment Monitoring Sensor Nodes

Solar cell monitoring system based on wireless sensor network

Design Bluetooth Low Energy for Battery and Photovoltaic Monitoring at Solar Powered Street Lamp System