Abstract:To measure the micro-displacement reliably with high precision, a single-ended eddy current sensor based on temperature compensation was studied in detail. At first, the principle of the eddy current sensor was introduced, and the manufacturing method of the probe was given. The overall design plan for the processing circuit was induced by analyzing the characteristics of the probe output signal. The variation in the probe output signal was converted to pulses with different widths, and then it was introduced to the digital phase discriminator along with a reference signal. The output from the digital phase discriminator was processed by a low-pass filter to obtain the DC component. At last, the signal was amplified and compensated to reduce the influence of temperature. The selection criteria of the frequency of the exciting signal and the design of the signal conditioning circuit were described in detail, as well as the design of the temperature-compensating circuit based on the digital potentiometer with an embedded temperature sensor. Finally, an experimental setup was constructed to test the sensor, and the results were given. The results show that nonlinearity exists in the single-ended eddy current sensor with a large range. When the range is 500 μm, the resolution can reach 46 nm, and the repeatability error is ±0.70% FR. Within the temperature range from +2 °C to +58 °C, the voltage fluctuation in the sensor is reduced to 44 mV after temperature compensation compared to the value of 586 mV before compensation. The proposed plan is verified to be feasible, and the measuring range, precision, and target material should be considered in real-world applications.

A Configurable Transceiver for Eddy Current Angular Displacement Sensor with Angle Error <0.8°

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

An Eddy Current Displacement Sensor Based on Piecewise Linearization of Inverse Function

A High-Accuracy Lock-In Transceiver For Speed Over 8000-R/Min Contactless Eddy-Current Angular Position Sensors

Nonlinear analysis of cylindrical capacitive sensor used for measuring high precision spindle rotation errors

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

Design and analysis of an eddy current displacement sensor with extended linear range

A Planar Capacitive Sensor for 2D Long-Range Displacement Measurement

A Novel Eddy Current Sensor for Displacement Measurement with High Accuracy and Long Range

Single-Ended Eddy Current Micro-Displacement Sensor with High Precision Based on Temperature Compensation

Accurate Coupling Coefficient Model for Eddy Current Sensor Displacement Calculation

Eddy Current Position Measurement in Harsh Environments: A Temperature Compensation and Calibration Approach

Novel Direct Digital Interface of Frequency-Modulated Eddy-Current Displacement Sensor (ECDS) for Real-Time Control of AMB

Design of a Digital Eddy Current Displacement Sensor Based on FPGA

Research on the Feasibility of Eddy Current Displacement Sensor with Temperature Variation for Non-Ferromagnetic Detection Material

High Temperature Eddy Current Displacement Sensor Based on Temperature Drift Compensation

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

A Noncontact Angle Sensor Based on Eddy Current Technique

Coupling Interference between Eddy Current Sensors for the Radial Displacement Measurement of a Cylindrical Target

Design of capacitive sensor for both displacement and angle measurement

A Compact Planar Inductive Angular Sensor with Small Latency and Low Power Consumption