Abstract:Two-dimensional Transition metal dichalcogenides (TMDCs), have now attracted much attention due to their unique layered structure and physical properties. Up to date, several studies have demonstrated monolayered and few-layered TMDC-based photodetectors with good stability, photo-switching time and broadband detectivity from UV to infrared light region. However, the reported responsivity is not as high as the theoretical expectation, indicating that the light absorption is limited by the atomic thickness of 2D-TMDCs and could still be improved. To overcome the drawback of low absorption in 2D TMDC materials, previous reports have revealed several strategies to enhance the electric field and light-harvesting in these atomically thin TMDC layers by hybridizing plasmonic noble-metal nanoparticles, such as Pt, Au and Ag, to facilitate the light-matter interaction at the surface of semiconductors. In this regard, we aim to combine highly absorptive CuInS 2 (CIS) nanocrystals with noble metal nanoparticles as the photosensitizer to enhance the intrinsic absorptivity and promote the performance of MoS 2 -based photodetectors. The interests of noble nanocrystals such as platinum and gold are featured for their distinctive properties of the carrier transportation and the storage when combined with semiconductor materials. The strategy described here acts as a perspective to significantly improve the performance of MoS 2 -based photodetectors with outstanding detection responsivity with selectable wavelengths by further controlling the size and material of the decorated CIS nanocrystals. In addition to optical sensing, TMDCs have also been developed as a promising candidate for gas-molecule detection. Different from commercial metal oxide gas sensors, TMDCs as sensing materials can be operated at room temperature with good performance, increasing its reliability for future industrial applications. Nevertheless, the relatively low response and long response/recovery time are the main drawbacks of these promising devices. Therefore, we proposed the approach to successfully increase the surface area of TMDCs by a one-step synthesis from WO 3 into three-dimensional (3D) WS 2 nanowalls through a rapid heating and rapid cooling process. Moreover, the combination of CdS/ZnS or CdSe/ZnS core/shell quantum dots (QDs) with different emission wavelengths and WS 2 nanowalls will further improve the performance of WS 2 -based photodetector devices, including 3.5~4.7 times photocurrent enhancement and shorter response time. The remarkable results of the QD-WS 2 hybrid devices to the high non-radiative energy transfer (NRET) efficiency between QDs and our nanostructured material are caused by the spectral overlap between the emission of QDs as the donors and the absorption of WS 2 as the acceptors. Additionally, the outstanding NO 2 gas-sensing properties of QDs/WS 2 devices were demonstrated with a remarkably low detection limit down to 50 ppb with a fast response time of 26.8 s, contributed by tremendous local p-n junctions generated from p-type WS 2 nanowalls and n-type CdSe-ZnS QDs in this hybrid system. Our strategies to combine 0D nanoparticles or quantum dots and 2D TMDC materials can significantly enhance the optical sensing and gas molecule sensing properties compared to pristine TMDC-based devices, resulting from the efficient charge or energy transfer between the multi-dimension material system and the creation of local p-n junctions. Moreover, the scalability of these hybrid nanostructures allows our devices to exhibit much more possibilities in advanced multifunctional applications.

Self-Powered and Flexible Gas Sensor Using Defect-Engineered Ws2/G Heterostructure

2D Transition Metal Dichalcogenide Heterostructures for p‐ and n‐Type Photovoltaic Self‐Powered Gas Sensor

UV-activated WS2/SnO2 2D/0D Heterostructures for Fast and Reversible NO2 Gas Sensing at Room Temperature

Gas Sensors Based on Two-Dimensional Transition Metal Dichalcogenide Nanoheterojunctions

Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film

Novel Design of 0D Nanoparticles-2D Transition-Metal Dichalcogenides Heterostructured Devices for High-Performance Optical and Gas-Sensing Applications

Defect Engineering in Transition Metal Dichalcogenide-Based Gas Sensors

Real-time optical gas sensing with two-dimensional materials

Resistive Gas Sensors Based on 2D TMDs and MXenes

Self-powered Waveguide-Integrated Photodetector Based on a Defect-Engineered WSe2/graphene Heterojunction

A Self‐Powered, Rechargeable, and Wearable Hydrogel Patch for Wireless Gas Detection with Extraordinary Performance

Interface Engineered WS2/ZnS Heterostructures for Sensitive and Reversible NO2 Room Temperature Sensing

Hierarchical WS 2 –WO 3 Nanohybrids with P–N Heterojunctions for NO 2 Detection

Mixed-dimensional Heterojunction by 3D CdS Nanowire Arrays Bridged with 2D WSe2 for Ultrafast Photoelectric Gas Sensor

Highly sensitive and recoverable room-temperature NO<sub>2</sub> gas detection realized by 2D/0D MoS<sub>2</sub>/ZnS heterostructures with synergistic effects

Electrically Transduced Gas Sensors Based on Semiconducting Metal Oxide Nanowires

Carbon Nanotube-Silicon Nanowire Heterojunction Solar Cells with Gas-Dependent Photovoltaic Performances and Their Application in Self-Powered NO 2 Detecting

DFT exploration of sensor performances of two-dimensional WO3 to ten small gases in terms of work function and band gap changes and I-V responses

Flexible self-powered photoelectrochemical-type photodetector based on 2D WS2-graphene heterojunction

Hierarchical WS2–WO3 Nanohybrids with P–N Heterojunctions for NO2 Detection

Fully Flexible MXene-based Gas Sensor on Paper for Highly Sensitive Room-Temperature Nitrogen Dioxide Detection.