Abstract:Immiscible alloys usually display various macrosegregation patterns induced by liquid phase separation. Here, the macrosegregation evolution kinetics for a model Fe 65 Cu 35 immiscible alloy were systematically investigated by both glass fluxing experiments and lattice Boltzmann simulations. The glass-fluxed Fe 65 Cu 35 melt was undercooled between 24 K and 291 K (0.17 T L ). For an undercooling lower than 121 K, the sample shows a relatively homogeneous macrostructure without phase separation. With increasing undercooling above 189 K, metastable liquid phase separation occurs, which leads to the formation of two typical macrosegregation patterns. Meanwhile, both the phase separation undercooling and the phase separation time are linearly increased. In the undercooling range of 189 K to 248 K, the phase-separated morphology is mainly characterized by an eccentric three-layer core–shell structure consisting of a Cu-rich shell, an Fe-rich layer and a Cu-rich core eccentric towards the ground. As the undercooling temperature exceeds 248 K, a two-layer core–shell macrosegregation composed of an Fe-rich core and a crescent-like Cu-rich shell eccentric towards the ground is frequently preserved. A two-dimensional lattice Boltzmann model, which simultaneously considers the combined effects of Marangoni convection, surface segregation and the gravity field, is proposed to sufficiently clarify the evolution kinetics for typical macrosegregation patterns. Numerical simulations demonstrate that Marangoni convection, surface segregation and Stokes motion are dominant dynamic mechanisms responsible for the macrosegregation evolution under glass fluxing conditions. Furthermore, the temperature gradient at the time of occurrence of metastable phase separation together with the phase separation time is found to play a crucial role in the selection of the macrosegregation pattern.

Segregation Kinetics of Immiscible Alloying Elements for Understanding Phase Separation in Multicomponent Alloys

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Phase Boundary Segregation in Multicomponent Alloys: A Diffuse-Interface Thermodynamic Model

Segregation Behavior of Alloying Elements in Different Oriented Single Crystal Nickel Based Superalloys

Influence of W, Mo and Ti trace elements on the phase separation in Al8Co17Cr17Cu8Fe17Ni33 based high entropy alloy

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Understanding the surface segregation behavior of transition metals on Ni(111): a first-principles study.

High-throughput first-principles investigation on grain boundary segregation of alloying elements in ferritic steel

Experimental Explorations and Lattice-Boltzmann Simulations for Macrosegregation Evolution Kinetics of Glass-Fluxed Immiscible Alloys

Segregation of alloying elements at the TiC/V interface: A first-principles study

The segregation behavior of elements at the Ti/TiFe coherent interface: First-principles calculation

Competition Between Elements During Mechanical Alloying in an Octonary Multi-Principal-element Alloy System

The mechanism of morphogenesis in a phase-separating concentrated multicomponent alloy

Segregation of alloying elements at the bcc-Fe/B2–NiAl interface and the corresponding effects on the interfacial energy

Dynamics and microstructural evolution of bulk amorphous Cu 12.5 Ni 10 Zr 41 Ti 14 Be 22.5 during phase separations: a small-angle neutron scattering approach

Observations and simulations for phase separation process of immiscible Fe50Sn50 alloy droplets placed on a chilling surface

Atomistic Mechanisms of Binary Alloy Surface Segregation from Nanoseconds to Seconds Using Accelerated Dynamics

Impact of 3d TM elements on Cu segregation in CrCuTiV-based high entropy alloys and their mechanical properties

The first-principles study of interfacial bonding strength and segregation behavior of alloyed elements at the η(MgZn 2 )/Al interface

Experimental study on phase relations in the Al-Mo-Nb ternary system

Segregation to grain boundaries in disordered systems: an application to a Ni-based superalloy