Abstract:Summary form only given. Exploding wire is performed by rapidly heating the wire to vaporization temperature with a high current pulse flowing through the wire. Exploding wires have found many applications among which are the opening switches named fuses in the circuits for inductive energy storage, the discharge loads of X-pinch or Z-pinches, namely wire array Z-pinches, and the production of nanopowders. The behavior of exploding wires for nanopowder production was studied by experiments and numerical simulation. In experiments, the evolution of the exploding wire was recorded by taking time- resolved pictures of the explosion with a Mach-Zehnder interferometer. From the interferograms the electron density and the expansion speed of the metallic vapor from the exploding wire can be deduced. The shock wave in front of the expanding wire could be visualized. In numerical simulation, the electrical behavior of exploding wires was obtained by solving nonlinear differential equation describing the discharge circuit. For the metal wires of high conductivity and low sublimation heat, such as Copper, Aluminum, Gold and Silver, the circuit simulation could be well conducted based on the resistivity model developed by Tucker1 in which the resisitivity was expressed with the explicit functions of specific action, i.e., p = f(g) . For the metals such as Titanium and Zinc of their resistivity anomalously changing, i.e., decreasing rather than increasing, with the liquid heating, the circuit simulation of the exploding wires could be performed using the implicit relationship between p and g that is read out point by point from the experimentally measured curve. With the circuit simulation the rate of the energy deposition in the exploding wires before the explosion could be obtained, which is helpful to choose right experimental conditions for possible overheat that is desirable for getting smaller nanopowders produced by exploding wires.

Early Stage of Bubble Dynamics Via Electrical Explosion in Water

Investigations Of Dynamics Of A Single Spark-Induced Bubble In Saline Water

Electrical Explosion Across Gas–liquid Interface: Aerosol Breakdown, Shock Waves, and Cavity Dynamics

Breakdown dynamics and instability of underwater metallic aerosol bubble atomized by electrical explosion

The electro-acoustic transition process of pulsed corona discharge in conductive water

Molecular Dynamics Study of Liquid–vapor Transition in Underwater Electrical Wire Explosion

Underwater electrical wire explosions under different discharge types: An experimental study with high initial energy storage

Electrothermal Instability in Different Modes of Underwater Electrical Wire Explosion

Two-dimensional simulation of microsecond-timescale underwater electrical explosion of a copper wire

Underwater Electrical Wire Explosion: Shock Wave from Melting Being Overtaken by Shock Wave from Vaporization

Unbalanced Distribution of Electric Current in Underwater Electrical Wire Array Explosion

Observation of Early Stage of Underwater Electrical Wire Explosion by Shadowgraph

Electroacoustic Process Study of Plasma Sparker under Different Water Depth

The Explosive Eletrical Characteristics Test Research on Electric Exploding Copper Wire

Behavior of exploding wires

Research on the sub-millisecond underwater electrical wire explosion process

PRELIMINARY EXPERIMENT ON SHOCK WAVES GENERATED BY UNDERWATER ELECTRICAL EXPLOSION OF WIRES

Study on dynamic characteristics of cavitation in underwater explosion with large charge

High-Speed Imaging of Transition from Fluid Breakup to Phase Explosion in Electric Explosion of Tungsten Wires in Air

Uniformity of Electrical Current for Underwater Electrical Wire Array Explosion

“Breakdown” of stratified electrical explosion products: Plasma development and its mechanical effect