Abstract:Low-altitude unmanned aerial vehicle (UAV) photogrammetry combined with structure-from-motion (SFM) algorithms is the latest technological approach to imaging 3D stereo constructions. At present, derivative products have been widely used in landslide monitoring, landscape evolution, glacier movement, volume measurement, and landscape change detection. However, there is still a lack of research into the accuracy of 3D data positioning based on the structure-from-motion of unmanned aerial vehicle (UAV-SFM) technology, itself, which can affect the measurable effectiveness of the results in further applications of this technological approach. In this paper, validation work was carried out for the DJI Phantom 4 RTK UAV, for earth observation data related to 3D positioning accuracy. First, a test plot with a relatively stable surface was selected for repeated flight imaging observations. Specifically, three repeated flights were performed on the test plot to obtain three sorties of images; the structure from motion and multi-view stereo (SFM-MVS) key technology was used to process and construct a 3D scene model, and based on this model the digital surface model (DSM) and digital orthophoto map (DOM) data of the same plot with repeated observations were obtained. In order to check the level of 3D measurement accuracy of the UAV technology itself, a window selection-based method was used to sample the point cloud set data from the three-sortie repeat observation 3D model. The DSM and DOM data obtained from three repeated flights over the surface invariant test plots were used to calculate the repeat observation 3D point errors, taking into account the general methodology of redundant observation error analysis for topographic surveys. At the same time, to further analyze the limits of the UAV measurement technique, possible under equivalent observation conditions with the same processing environment, a difference model (DOD) was constructed for the DSM data from three sorties, to deepen the overall characterization of the differences between the DSMs obtained from repeated observations. The results of the experimental study concluded that both the analysis of the 3D point set measurements based on window sampling and the accuracy evaluation using the difference model were generally able to achieve a centimeter level of planimetric accuracy and vertical accuracy. In addition, the accuracy of the surface-stabilized hardened ground was better, overall, than the accuracy of the non-hardened ground. The results of this paper not only probe the measurement limits of this type of UAV, but also provide a quantitative reference for the accurate control and setting of an acquisition scheme of the UAV-based SfM-MVS method for geomorphological data acquisition and 3D reconstruction.

First Unmanned Aerial Vehicle Airborne Gravimetry Based on the CH-4 UAV in China

Airborne Measurement of Earth Gravity by Comparing Three Kinds of Gravimeters

The First Airborne Scalar Gravimetry System Based on SINS/DGPS in China

Research and Implementation of a Height Measuring Method for Small-Size UAV

A Flight Test of the Strapdown Airborne Gravimeter SGA-WZ in Greenland.

UAV-based low-altitude aerial photogrammetric application in mine areas measurement

Photogrammetric Processing of Unmanned Aerial Vehicle Imagery in Heihe Middle Reaches

APPLICATION OF ULTRASONIC ANEMOMETER ARRAY TO FIELD MEASUREMENTS OF THE DOWNWASH FLOW OF AN AGRICULTURAL UNMANNED HELICOPTER

Improving Airborne Strapdown Vector Gravimetry Using Stabilized Horizontal Components

Estimation of surface soil moisture by a multi‐elevation UAV‐based ground penetrating radar

Experimental Investigations on Airborne Gravimetry Based on Compressed Sensing

Research on Rapid Surveying and Mapping of Outfield Absolute Gravity Based on Vehicle-Mounted Atomic Gravimeter

Development of a UAV-borne cavity-enhanced albedometer for in-situ measurements of the vertical profiles of aerosol optical properties

Technology of Airborne Gravimetry Based on SINS/DGPS

Development and application of an aeromagnetic survey system for a large load rotary-wing UAV

Airborne Gravimetry of GEOHALO Mission: Data Processing and Gravity Field Modeling

Experimental Study on 3D Measurement Accuracy Detection of Low Altitude UAV for Repeated Observation of an Invariant Surface

A Study on Measuring the Wind Field in the Air Using a Multi-rotor UAV Mounted with an Anemometer

The development of an UAV borne direct georeferenced photogrammetric platform for Ground Control Point free applications

UAV Photogrammetry in Intertidal Mudflats: Accuracy, Efficiency, and Potential for Integration with Satellite Imagery

New calibration method using low cost MEM IMUs to verify the performance of UAV-borne MMS payloads