Abstract:The impossibility to reproduce the experimental conditions, which is difficult to perfectly control and inevitably fluctuate, raises the uncertainties in numerical simulation. The objective of this work is to quantify the uncertainty and sensitivity of hypersonic transition modeling due to uncertainty in the flow parameters. Two representative transition models, e.g. gamma-Re-theta and k-omega-gamma, are considered. And five flow parameters including freesteam Mach number, pressure, temperature, turbulence intensity and wall temperature are selected as aleatory uncertain variables uniformly distributing among the bound. Then the stochastic expansions based on point-collocation non-intrusive polynomial chaos (NIPC) method is utilized to represent and propagate the uncertainties in the output quantities of interests (Qols) for hypersonic flow over the flat plate and the straight cone. Benefiting from the efficiency of the NIPC method, accurate uncertainty results are obtained with only 42 evaluations for each problem. Furthermore, Sobol indices are utilized to provide a relative ranking of each input uncertainty to the overall uncertainty in the output. The uncertainty results quantitatively verify that the transition zone is great sensitive to changes in flow parameters. Besides, for both the heat flux and skin friction coefficient, the importance ranking of the flow parameters and their trends are roughly resemble between the gamma-Re-theta and k-omega-gamma model. This signifies that their sensitivity with respect to the input parameters is mainly associated with flow features rather than transition models. However, the contrary is the case for uncertainty in transition onset and length whose sensitivity to uncertainties of input parameters depends strongly on transition models. The present investigation shows that the freestream pressure is the greatest contributor to uncertainty in most cases. The freestream turbulence intensity, whose effect can be nearly negligible in heat flux and C-f, plays a predominant role on transition length. (C) 2019 Elsevier Ltd. All rights reserved.

Uncertainty Quantification and Sensitivity Analysis of Closure Parameters of Transition Models

Quantification of Parametric Uncertainty in K–ω–γ Transition Model for Hypersonic Flow Heat Transfer

Quantification of parametric uncertainty in γ-Reθ model for typical flat plate and airfoil transitional flows

Uncertainty and Sensitivity Analysis of Flow Parameters for Transition Models on Hypersonic Flows

Uncertainty Quantification of K-Ω Turbulence Model for Hypersonic Flow

Uncertainty Analysis of Turbulence Model in Capturing Flows Involving Laminarization and Retransition

Uncertainty Quantification of SSG/LRR-ω Turbulence Model Closure Coefficients

Uncertainty and Sensitivity Analysis of SST Turbulence Model on Hypersonic Flow Heat Transfer

Uncertainty quantification of the standard k-ε turbulence model closure coefficients in predicting aerodynamics of high-speed train

Uncertainty Quantification and Sensitivity Analysis of Transonic Aerodynamics with Geometric Uncertainty

Uncertainty quantification and global sensitivity analysis for hypersonic aerothermoelastic analysis

Parameter Uncertainty Quantification for a Four-Equation Transition Model Using a Data Assimilation Approach

Effects of the Uncertainty of Wall Distance on the Simulation of Turbulence/Transition Phenomena

Uncertainty Analysis of Parameters in SST Turbulence Model for Shock Wave-Boundary Layer Interaction

Parallel Compatible Transition Closure Model for High-Speed Transitional Flow

Identification of Parameters for Standard K-Ε Turbulence Model Based on Bayesian Inference

Uncertainty Analysis of Inflow Parameters for Mid-Lift-to-Drag Vehicle Transition

Bayesian Uncertainty Quantification Analysis of the SST Model for Transonic Flow Around Airfoils Simulation

Assessment and Improvement of K-Ω-γ Model for Separation-Induced Transition Prediction

An Efficient Bayesian Uncertainty Quantification Approach with Application to K-Ω-γ Transition Modeling

Fully Local Formulation of A Transition Closure Model for Transitional Flow Simulations