Abstract:This paper studies the distribution characteristics of the current in situ stress field in northeast Yunnan Province by using multisource stress data, including in situ stress measurements, focal mechanism solutions, and borehole damage information, and comprehensively determines the in situ stress magnitude and direction in the mining area. Based on the borehole ultrasonic imaging test results, a new method using borehole breakouts and drilling‐induced fractures was proposed to determine the stress direction, and a statistical analysis was conducted on the dip direction, dip angle, and line density of structural planes. Through rock mechanics experiments, the evolution of rock mechanical properties with depth was studied, and the influences of rock mass structure and rock mechanical properties on in situ stress were explored. The Maoping lead–zinc mining area is a significant metal mine site in northeastern Yunnan. In this study, both hydraulic fracturing in situ stress testing and ultrasonic imaging logging were first carried out in the mining area. Second, 930 focal mechanism solutions and 231 sets of stress data near the mining area were collected. Then, the variations in the type of in situ stress field, the magnitude of in situ stress, the direction of horizontal principal stress, and the ratio of lateral pressure were analyzed to characterize the distribution of the in situ stress field. On this basis, a new method using borehole breakouts and drilling‐induced fractures was proposed to determine the stress direction. Finally, the evolution of the mechanical properties of dolomite with burial depth was analyzed and the influence of rock mechanical properties on the distributions of the in situ stress field was explored. The results show that the in situ stress in the mining area is σH > σV > σh, indicating a strike–slip stress state. The in situ stress is high in magnitude, and its value increases with burial depth. The maximum and minimum horizontal lateral stress coefficients are stabilized at approximately 1.22 and 0.73, respectively. The direction of the maximum horizontal principal stress is NW, mainly ranging from N58.44° W to N59.70° W. The stress field inferred from the focal mechanism solution is in good agreement with the test results. The proportion of structural planes with dip angles between 30° and 75° exceeds 80%, and the dip direction of the structural planes is mainly NW to NWW. The line density of structural planes shows high density in shallow areas and low density in deep areas. More energy tends to be accumulated in rocks with higher elastic modulus and strength, leading to higher in situ stress levels. These findings are of significant reference for mine tunnel layout, support design optimization, and disaster prevention.

In Situ Stress Field Prediction Based on Seismic Data in the Sijiazhuang Mining Area

Controlling of structural stress field to the fractures in xuanhan-daxian region,northeastern sichuan basin, china

Study on In Situ Stress Distribution Law of the Deep Mine: Taking Linyi Mining Area as an Example

Determination of mining-induced stress based on mining face hydraulic support stress and micro-seismicity

Current stress field and its relationship to tectonism in a coal mining district, central China, for underground coal energy exploration

Integrating well-logs, 3D seismic, and earthquake data for the comprehensive prediction of 3D in-situ stress orientations: A case study from the Weiyuan area in the Sichuan Basin, China.

In Situ Dynamic Monitoring of Stress Revolution with Time and Space under Coal Seam Floor During Longwall Mining

In situ Stress–Coal Structure Relationship and Its Influence on Hydraulic Fracturing: A Case Study in Zhengzhuang Area in Qinshui Basin, China

In-situ stress prediction in ultra-deep carbonate reservoirs of Fuman Oilfield, Tarim Basin of China

Mining stress formation and distribution: Predictive model based on overburden key strata structure

Numerical back analysis method of three-dimensional in situ stress fields considering complex surface topography and variable collinearity

A comprehensive study on in situ stress field characteristics and changes in rock mechanical properties in deep mines in northeastern Yunnan, China

In Situ Stress Distribution of Deep Coals and Its Influence on Coalbed Methane Development in the Shizhuang Block, Qinshui Basin, China

Paleotectonic Stress and Present Geostress Fields and Their Implications for Coalbed Methane Exploitation: A Case Study from Dahebian Block, Liupanshui Coalfield, Guizhou, China

Implications of in-situ stress measurement in mining engineering

In-situ stress prediction method for decoupled overburden pressure under tectonic constraints

Simulation of Paleotectonic Stress Fields and Distribution Prediction of Tectonic Fractures at the Hudi Coal Mine, Qinshui Basin

Influence of In Situ Stress on Well Test Permeability and Hydraulic Fracturing of the Fanzhuang Block, Qinshui Basin

Instability Monitoring and Numerical Analysis of Typical Coal Mines in Southwest China Based on DS-InSAR

Distribution Law of In Situ Stress and Its Engineering Application in Gateroad Maintenance: A Case Study

Numerical simulation of the in situ stress in a high-rank coal reservoir and its effect on coal-bed methane well productivity