Abstract:CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x , hybrid perovskites thin films were grown on glass substrates employing spin-coating technique at different rotational speeds varying from 1000 to 2000 rpm. All the films exhibited a polycrystalline tetragonal structure with a preferred (110) orientation. For each rotational speed, the CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films had approximately the same order of the absorbance in the visible region of solar spectrum. The current–voltage measurements of the CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films showed a ferroelectric hysteresis behavior in the dark which it becomes Ohmic under the illumination indicating the microstructural improvement. The all samples were strongly resistive in the dark, and their electrical conductivity improving thousands of times under the illumination; it had varied in the ranges 25.5 × 10 –3 ‒206.61 (Ω cm) –1 and 82.81 × 10 –3 ‒689.47 (Ω cm) –1 for CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x , respectively. Our results demonstrated that the 1000 and 2000 rpm were optimal parameters for CH 3 NH 3 PbI 3 and CH 3 NH 3 PbI 3– x Cl x films preparation, respectively. Moreover, the addition of the chlorine in CH 3 NH 3 PbI 3 films improves their physico-chemical properties. Indeed, compared to the CH 3 NH 3 PbI 3 prepared at 1000 rpm, the CH 3 NH 3 PbI 3– x Cl x film synthesized at 2000 rpm had the thinner thickness 571.58 nm, largest crystallite size 204.81 nm, lesser dislocation density 2.38 × 10 –5 lines nm –2 , superior quality of surface morphology, higher band gap 1.53 eV, lower Urbach energy 276.23 meV, higher refractive index 2.96, higher electrical conductivity in the dark 82.81 × 10 –3 (Ω cm) –1 and under the illumination 689.47 (Ω cm) –1 . CH 3 NH 3 PbI 3– x Cl x thin film synthesized at 2000 rpm has better quality that might be more suitable as a light absorbers films for photovoltaic cells and optoelectronic devices.

Single- and Multilayered Perovskite Thin Films for Photovoltaic Applications

High Quality Hybrid Perovskite Semiconductor Thin Films with Remarkably Enhanced Luminescence and Defect Suppression via Quaternary Alkyl Ammonium Salt Based Treatment

Structural, Mechanical, and Optoelectronic Properties of CH3NH3PbI3 as a Photoactive Layer in Perovskite Solar Cell

Synthesis and investigation of the properties of organic-inorganic perovskite films with non-contact optical methods

Constructing the Electronic Structure of CH3NH3PbI3 and CH3NH3PbBr3 Perovskite Thin Films from Single-Crystal Band Structure Measurements.

Investigation of Physico-Chemical Properties of CH3NH3PbI3 and CH3NH3PbI3–xClx Hybrid Perovskites Thin Films for Photovoltaic and Optoelectronic Applications: A Comparative Study

The Optical Properties of Organic Halide Perovskites

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells

Photodetectors Based on Two-Dimensional Layer-Structured Hybrid Lead Iodide Perovskite Semiconductors

Electronic Structure and Optical Properties of Α-Ch3nh3pbbr3 Perovskite Single Crystal.

Organic-inorganic Hybrid Lead Halide Perovskites for Optoelectronic and Electronic Applications.

Growth and Evolution of Solution-Processed CH3NH3PbI3-xClx Layer for Highly Efficient Planar-Heterojunction Perovskite Solar Cells

Two-Dimensional Layered Organic–Inorganic Hybrid Perovskite Thin-Film Fabrication by Langmuir–Blodgett and Intercalation Techniques

Multilayered Perovskite Materials Based on Polymeric-Ammonium Cations for Stable Large-Area Solar Cell

Lead‐Free Halide Perovskites for optoelectronic application: Investigation of Structural, Optical, Electric and Dielectric behaviors

Multi Band Gap Electronic Structure in CH3NH3PbI3

Investigation of Optical and Dielectric Constants of Organic-Inorganic CH3NH3PbI3 Perovskite Thin Films

Methyl-ammonium lead iodide hybrid perovskite thin film as active material for energy conversion devices

Synthesis, Structure and Photoluminescence Properties of 2D Organic–Inorganic Hybrid Perovskites

Layered structures of organic/inorganic hybrid halide perovskites

Formation of organic–inorganic mixed halide perovskite films by thermal evaporation of PbCl2 and CH3NH3I compounds