Abstract:Lithium ion capacitors (LICs) are a new generation of energy storage devices that combine the super energy storage capability of lithium ion batteries with the satisfactory power density of supercapacitors. The development of high-performance LICs still faces great challenges due to the unbalanced reaction kinetics at the anode and cathode. Therefore, it is an inevitable need to enhance the electron/ion transfer capability of the anode materials. In this paper, to obtain a superior-rate and high-capacity Ni3S2-based anode, highly conductive Ti3C2Tx MXene sheets were introduced to sever as the carrier of Ni3S2 nanoparticles and simultaneously an amorphous carbon layer which coats onto the surface of Ni3S2 nanoparticles was in-situ generated by the carbonization of dopamine reactant. The as-synthesized Ni3S2/Ti3C2Tx/C composite exhibits a high specific surface area (112.6 m2/g) because of the addition of Ti3C2Tx that can reduce the aggregation of Ni3S2 nanoparticles and the in-situ generated amorphous carbon layer that can suppress the growth of Ni3S2 nanoparticles. The Ni3S2/Ti3C2Tx/C anode possesses a remarkable reversible discharge specific capacity (626.0 mAh/g under 0.2 A/g current density), which increases to 1150.8 mAh/g after 400-cycle charge/discharge measurement at the same measurement condition indicating eminent cyclability, along with superior rate capability. To construct a superior-performance LIC device, a sterculiae lychnophorae derived porous carbon (SLPC) cathode with an average discharge specific capacity of 73.4 mAh/g@0.1A/g was prepared. The Ni3S2/Ti3C2Tx/C//SLPC LIC device with optimal cathode/anode mass ratio has a satisfactory energy density ranging from 32.8 to 119.1 Wh kg-1 at the corresponding power density of 8799.4 to 157.5 W kg-1, together with a prominent capacity retention (95.5 %@1 A/g after 10,000 cycles).

Fast Electrochemical Redox Kinetics of Two-Dimensional Tio2/Ti3c2tx (mxene) Heterostructure for High-Performance Lithium-Ion Capacitor

Fast electrochemical redox kinetics of two-dimensional TiO2/Ti3C2T (MXene) heterostructure for high-performance lithium-ion capacitor

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Robust and Fast Lithium Storage Enabled by Polypyrrole-Coated Nitrogen and Phosphorus Co-Doped Hollow Carbon Nanospheres for Lithium-Ion Capacitors

Holey Ti3C2 MXene-Derived Anode Enables Boosted Kinetics in Lithium-Ion Capacitors

Engineering Chemical-Bonded Ti3C2 MXene@carbon Composite Films with 3D Transportation Channels for Promoting Lithium-Ion Storage in Hybrid Capacitors

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Carbon-reinforced Ni3S2/Ti3C2Tx MXene composite as an anode for superior-performance lithium-ion capacitors

Boosting Ion/e− Transfer of Ti3C2 Via Interlayered and Interfacial Co-Modification for High-Performance Li-ion Capacitors

Tetrabutylammonium‐Intercalated 1T‐MoS 2 Nanosheets with Expanded Interlayer Spacing Vertically Coupled on 2D Delaminated MXene for High‐Performance Lithium‐Ion Capacitors

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

One-step MXene Selenization-Conversion into Carbon-Scaffold-anchored TiSe2 Nanosheets Enabling Interlayer- and Vacancy-Mediated Ion Transport Mechanisms for Fast Lithium-Ion Storage

Construction of two-dimensional bimetal (Fe-Ti) oxide/carbon/MXene architecture from titanium carbide MXene for ultrahigh-rate lithium-ion storage

SnO2/SnS2 heterostructure@ MXene framework as high performance anodes for hybrid lithium-ion capacitors

TiO2 nanotubes supported ultrafine MnCo2O4 nanoparticles as a superior-performance anode for lithium-ion capacitors

Hierarchical TiO2-x Nanoarchitectures on Ti Foils As Binder-Free Anodes for Hybrid Li-ion Capacitors

In Situ Construction of Bimetallic Selenides Heterogeneous Interface on Oxidation-Stable Ti3C2Tx MXene Toward Lithium Storage with Ultrafast Charge Transfer Kinetics

A High‐Energy Lithium‐Ion Capacitor by Integration of a 3D Interconnected Titanium Carbide Nanoparticle Chain Anode with a Pyridine‐Derived Porous Nitrogen‐Doped Carbon Cathode

Engineering Ti3C2-MXene Surface Composition for Excellent Li+ Storage Performance

High-Performance Li-Ion Capacitor Based on an Activated Carbon Cathode and Well-Dispersed Ultrafine TiO2 Nanoparticles Embedded in Mesoporous Carbon Nanofibers Anode.

2D Black TiO2-x Nanoplate-Decorated Ti3C2 MXene Hybrids for Ultrafast and Elevated Stable Lithium Storage