Abstract:Self-compacted concrete (SCC) is a special type of concrete; it is a liquid mixture appropriate for structural elements with excessive reinforcement without vibration. SCC is commonly produced by increasing the paste volume and cement content. As cement production is one of the huge factors in releasing CO2 gas into the atmosphere, by-product materials such as fly ash are utilized as a cement replacement in concrete. In addition to the positive environmental impact, fly ash can maintain an excellent fresh and mechanical property. Incorporating fly ash into self-compacted concrete is widely applied in practice. However, its application is frequently limited by a lack of knowledge about the mixed material gained from laboratory tests. The most significant mechanical property for all concrete types is compressive strength (CS); also, the slump flow diameter (SL) in the fresh state is a crucial property for SCC. Hence, developing an accurate and reliable model for predicting the CS and SL is very important for saving time and energy, as well as lowering the cost. This research study proposed a projection of both the CS and SL of SCC modified with fly ash by three different model approaches: Nonlinear regression (NLR), Multi-Linear regression (MLR), and Artificial Neural Networks (ANN). In this regard, two different datasets were collected and analyzed for developing models: 308 data samples were used for predicting the CS, and 86 data samples for the SL. Each database included the same five independent parameters. The ranges for CS prediction were: cement (134.7–583 kg/m3), water-to-binder ratio (0.27–0.9), fly ash (0–525 kg/m3), sand (478–1180 kg/m3), coarse aggregate (578–1125 kg/m3), and superplasticizer (0–1.4%). The dependent parameter (CS) ranged from 9.7 to 81.3 MPa. On the other hand, the data ranges for the SL prediction included independent parameters such as cement (83–733 kg/m3), water-to-binder ratio (0.26–0.58), fly ash (0–468 kg/m3), sand (624–1038 kg/m3), coarse aggregate (590–966 kg/m3), and superplasticizer (0.087–21.84%). Also, the dependent parameter (SL) ranged from 615 to 800 m. Various statistical assessment tools, such as the coefficient of determination (R2), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Objective value (OBJ), and Scatter Index (SI), were used to evaluate the performance of the developed models. The results showed that the ANN model best predicted the CS and SL of SCC mixtures modified with fly ash. Furthermore, the sensitivity analysis demonstrated that the cement content is the most effective factor in predicting the CS and SL of SCC mixtures.

Interpreting the Strength Activity Index of Fly Ash with Machine Learning

Forecasting the strength of micro/nano silica in cementitious matrix by machine learning approaches

An Artificial Intelligence Model for Computing Optimum Fly Ash Content for Structural-Grade Concrete

Assessment of Longstanding Effects of Fly Ash and Silica Fume on the Compressive Strength of Concrete Using Extreme Learning Machine and Artificial Neural Network

Predictive Regression Models for the Compressive Strength of Fly Ash-based Alkali-Activated Cementitious Materials via Machine Learning

Application of novel deep neural network on prediction of compressive strength of fly ash based concrete

Prediction of Compressive Strength of Fly-Ash-Based Concrete Using Ensemble and Non-Ensemble Supervised Machine-Learning Approaches

Evaluation on Reactivity of Fly Ash from Different Sources in Alkali Activated System-Progressing Environmentally Construction Through Waste Utilization

Soft Computing and Machine Learning-Based Models to Predict the Slump and Compressive Strength of Self-Compacted Concrete Modified with Fly Ash

A Comparative Study for the Prediction of the Compressive Strength of Self-Compacting Concrete Modified with Fly Ash

Novel hybrid HGSO optimized supervised machine learning approaches to predict the compressive strength of admixed concrete containing fly ash and micro-silica

Compressive strength and sensitivity analysis of fly ash composite foam concrete: Efficient machine learning approach

Artificial neural network modeling for the effect of fly ash fineness on compressive strength

Compressive Strength Estimation of Fly Ash/Slag Based Green Concrete by Deploying Artificial Intelligence Models

Intelligent Design of Construction Materials: A Comparative Study of AI Approaches for Predicting the Strength of Concrete with Blast Furnace Slag

Predicting fresh and hardened properties of self-compacting concrete containing fly ash by artificial neural network model

Evaluating the Mechanical Strength Prediction Performances of Fly Ash-Based MPC Mortar with Artificial Intelligence Approaches

AI Mix Design of Fly Ash Admixed Concrete Based on Mechanical and Environmental Impact Considerations

Estimating the mechanical properties of high-performance concrete via automated and ensembled machine learning methods

Data‐driven approach for investigating and predicting of compressive strength of fly ash–slag geopolymer concrete