Abstract:A bio-inspired nanofibrous Co3O4/TiO2/carbon composite was fabricated using natural cellulose substrate (laboratory filter paper) as both the carbon source and the structural scaffold. Employing a surface sol -gel process to form a thin TiO2 gel layer coating on each cellulose nanofiber of the filter paper, the resulted composite sheet was successively carbonized in inert atmosphere to give a nanofibrous TiO2/carbon composite; afterwards, nano-sized Co3O4 particles (10-30 nm) were uniformly deposited onto the yielded composite fibers via a simple hydrothermal method, resulting in the Co3O4/TiO2/carbon hybrid. The ternary composite possessed a unique hierarchically three-dimensional porous structure which inherited precisely from the initial filter paper. This special structure with the internal conductive carbon fiber and the external nano-sized Co3O4 particles offered the nanocomposite with an excellent electrochemical performance as anodic material for lithium-ion batteries. The optimal sample with a Co3O4 mass content of 50.6% delivered an initial discharge capacity of 1239 mAh g(-1) at a current density of 100 mA g(-1), which was far exceeded the theoretical capacity of Co3O4. The extra capacity is ascribed to the additional lithium storage sites provided by the large specific surface area of the composite, and the formation of the solid electrolyte interface (SEI) layer in the initial discharge process causing a large consumption of Li+ which results in some irreversible capacity. And after 200 discharge/charge cycles, a high reversible capacity of 764 mAh g(-1) was maintained, which is higher than most of the Co3O4/carbon hybrid materials reported. This work provided a simple and efficient strategy for designing and preparing nanoscale metal-oxide/carbon composite material with considerable potential in energy storage and conversion. (C) 2019 Elsevier B.V. All rights reserved.

A Carbon@sno2@moo2 Nanoarchitectonic Derived from Cellulose Substance As an Anodic Material for Lithium-Ion Batteries

Hierarchical SnO2/Carbon Nanofibrous Composite Derived from Cellulose Substance as Anode Material for Lithium‐Ion Batteries

A Cellulose-Derived Nanofibrous MnO2-TiO2-Carbon Composite As Anodic Material for Lithium-Ion Batteries

A Hierarchical, Nanofibrous, Tin-Oxide/Silicon Composite Derived from Cellulose as a High-Performance Anode Material for Lithium-Ion Batteries

A Bio-Inspired Nanofibrous Co3O4/TiO2/carbon Composite As High-Performance Anodic Material for Lithium-Ion Batteries

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

A Cellulose Derived Nanotubular MoO3/SnO2 Composite with Superior Lithium Storage Properties

Natural Cellulose Derived Nanocomposites as Anodic Materials for Lithium‐Ion Batteries

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

A Bio-Inspired Nanotubular Na2MoO4/TiO2 Composite As a High-Performance Anodic Material for Lithium-Ion Batteries

Self-Assembly Approach for Synthesis of Nanotubular Molybdenum Trioxide/Titania Composite Anode for Lithium-Ion Batteries

A Bioinspired Three-Dimensional Nanofibrous Cu-nanoparticle/SnO2/carbon Composite As an Anodic Material for Lithium-Ion Battery

Bio-inspired Sandwich-Structured Carbon/silicon/titanium-Oxide Nanofibers Composite As an Anode Material for Lithium-Ion Batteries

Natural‐Cellulose‐Derived Tin‐Nanoparticle/Carbon‐Nanofiber Composite As Anodic Material in Lithium‐Ion Batteries

Bio-inspired Hierarchical Nanofibrous SnS/C Composite with Enhanced Anodic Performances in Lithium-Ion Batteries

Natural cellulose derived nanofibrous Ag-nanoparticle/SnO2/carbon ternary composite as an anodic material for lithium-ion batteries

A Three-Dimensional Fibrous Tungsten-Oxide/carbon Composite Derived from Natural Cellulose Substance As an Anodic Material for Lithium-Ion Batteries

Interconnected Moo2 Nanocrystals with Carbon Nanocoating As High-Capacity Anode Materials for Lithium-Ion Batteries

Hierarchical Nanostructures Derived from Cellulose for Lithium-Ion Batteries

Carbon Nanotubes Connecting and Encapsulating MoS2-Doped SnO2 Nanoparticles as an Excellent Lithium Storage Performance Anode Material