Abstract:Environmentally friendly lead-free dielectric ceramics have attracted wide attention because of their outstanding power density, rapid charge/dischargerate, and superior stability. Nevertheless, as a hot material in dielectric ceramic capacitors, the energy storage performance of Na0.5Bi0.5TiO3-based ceramics has been not satisfactory because of their higher remnant polarization value and low dielectric breakdown strength, which is a problem that must be urgently overcome. In this work, the (1 - x) (0.6Na0.5Bi0.5TiO3 - 0.4Sr0.7Bi0.2TiO3) - xBa(Mg1/3Ta2/3)O3 (BNST-xBMT) systems were designed based on a dual optimization strategy of domain and bandgap to solve the above problems. As a result, a record-breaking ultrahigh energy density and excellent efficiency (Wrec = 8.58 J/cm3, η = 93.5%) were obtained simultaneously under 565 kV/cm for the BNST-0.08BMT ceramic. The introduction of Sr0.7Bi0.2TiO3 induces the formation of nanodomains in BNT-based ceramics, leading to slim P-E curves, and the further modification of Mg/Ta reduces the grain sizes and increases the bandgap width, resulting in significant enhancement of the dielectric breakdown strength. Moreover, excellent stability and superior discharge performance (Wd = 4.7 J/cm3, E = 320 kV/cm) in the BNST-0.08BMT ceramic were also achieved. The results suggest that the BNST-0.08BMT ceramic shows potential applicability for dielectric energy storage ceramics. Simultaneously, the composition-design concept in the system provides a good reference for the further development of ceramic dielectric capacitors.

Enhancing the energy storage density of Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3 </sub>thin films by adding an amorphous alumina

Amorphous/Crystalline Engineering of BaTiO 3 -Based Thin Films for Energy-Storage Capacitors

Ni-modified BaTiO3 film prepared by sol-gel with high energy storage performance

Enhanced energy storage property achieved in Na0.5Bi0.5TiO3-based ferroelectric ceramics via composition design and grain size tuning

High Energy Storage Performance in BTO-based Ferroelectric Films

Ultra-high energy storage density BaTiO3 amorphous thin film via multi-ion synergistic optimization

Synergistic Function via Amorphous and Nanoscale Polarization Heterogeneous Regions in (1-x)BaTiO3 -xBi(Ni0.5 Zr0.5 )O3 Thin Film with Ultrahigh Energy Storage Capability and Stability

Large energy-storage density with good dielectric property in bismuth sodium titanate-based thin films

Enhanced Dielectric Energy Storage Performance of 0.45Na 0.5 Bi 0.5 TiO 3 -0.55Sr 0.7 Bi 0.2 TiO 3 /AlN 0–3 Type Lead-Free Composite Ceramics

Modulation of capacitive energy storage performance in 0.9(Na0.5Bi0.5)(Fe0.02Ti0.98)O3-0.1SrTiO3 relaxor ferroelectric thin film via sol-gel optimizing strategy

Nanocrystalline Engineering Induced High Energy Storage Performances of Fatigue-Free Ba 2 Bi 3.9 Pr 0.1 Ti 5 O 18 Ferroelectric Thin Films

Improvement of Energy Storage Properties of BNT-based Ceramics Via Compositional Modification

<sub>???????</sub>???????Enhanced Energy Storage Performance in Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-Sr<sub>0.7</sub>Bi<sub>0 .2</sub>TiO<sub>3</sub> Relaxor Ferroelectric Thin Films by Entropy Design

Enhanced Energy Storage Performance in Na 0.5 Bi 0.5 TiO 3 -Sr 0.7 Bi 0.2 TiO 3 Relaxor Ferroelectric Thin Films by Entropy Design

Grain size modulated (Na0.5Bi0.5)0.65Sr0.35TiO3-based ceramics with enhanced energy storage properties

Ultrahigh Energy Storage Density and Efficiency in Bi 0.5 Na 0.5 TiO 3 -Based Ceramics via the Domain and Bandgap Engineering

Improving the energy storage performance of (Bi0.5Na0.5)TiO3–BaTiO3 based ceramics via (Sr0.7Bi0.2)TiO3 modification

An ultrahigh energy storage efficiency and recoverable density in Bi0.5Na0.5TiO3 with the modification of Sr0.85La0.1TiO3 via viscous polymer process

Ultrahigh energy density and efficiency of BaTiO 3 -based ceramics via multiple design strategies

Structural, Dielectric, and Ferroelectric Properties of BaTiO3–Bi(Ni1/2Ti1/2)O3 Lead-Free Ceramics with Remarkable Energy Storage Performance under Low Electric Fields

Enhanced Energy Storage Performance in Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-Sr<sub>0.7</sub>Bi<sub>0.2</sub>TiO<sub>3</sub> Relaxor Ferroelectric Thin Films by Entropy Design