Abstract:Poly(lactide-co-glycolide) (PLGA) copolymers are the most prevalent materials for tissue engineering applications. To mimic the real microenvironment of extracellular matrix (ECM) for cell growth, nanofibrous PLGA scaffolds are preferred. PLGA5050 (in which the molar ratio of lactidyl to glycolidyl units is 50:50), which is an utterly amorphous polymer, was first reported to be made into nanofibrous networks (fiber diameter around 500nm) using phase separation from PLGA5050/THF solutions in this study. The concentration of polymeric solution had significant effects on fiber diameter and unit length. Nonsolvent (e.g. H2O) was unnecessary to form the PLGA5050 gel, which was critical to nanofibrosis, as if the environmental temperature for gelation occurrence was low enough (−70°C). The physical crosslinks to stabilize the PLGA5050/THF gel were believed to be GA segments along the backbone owing to their inferior solubility in THF. The addition of H2O would cause adverse effects of liquid–liquid phase separation and nanofibrosis failure owing to the hydrophilicity of glycolidyl units. Associating with the phase separation method, particle-leaching technique was applied to fabricate three-dimensional scaffolds with macroporous and nanofibrous structures. To ensure the occurrence of nanofibrosis on macropore walls, the temperature of salt particles should be best lowed to −70°C beforehand. Accordingly, scaffolds prepared under varied parameters exhibited different nanofiber and pore morphologies, which affected the pore size, porosity, specific surface area, water contact angle and protein adsorption ability etc. The preliminary cell (MC3T3-E1) culture confirmed the cell ingrowth into the macroporous and nanofibrous PLGA5050 scaffolds in comparison with the solely nanofibrous matrixes. This kind of bi-scaled three dimensional matrixes can be superior candidate scaffolds for tissue engineering applications.

Enhanced Cellular Infiltration of Tissue-Engineered Scaffolds Fabricated by PLLA Nanogrooved Microfibers

A Novel Layer-Structured Scaffold with Large Pore Sizes Suitable for 3D Cell Culture Prepared by Near-Field Electrospinning

Surface Engineering of Nano-fibrous Biodegradable Poly(L-lactic acid) Scaffolds for Tissue Engineering

Interaction of Dermal Fibroblasts with Electrospun Composite Polymer Scaffolds Prepared from Dextran and Poly Lactide-Co-glycolide

Ultraporous nanofeatured PCL–PEO microfibrous scaffolds enhance cell infiltration, colonization and myofibroblastic differentiation

Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching

3D Nanofiber Scaffolds from 2D Electrospun Membranes Boost Cell Penetration and Positive Host Response for Regenerative Medicine.

Fabrication and Cell Responsive Behavior of Macroporous PLLA/Gelatin Composite Scaffold with Hierarchical Micro-Nano Pore Structure

Femtosecond Laser Ablation Enhances Cell Infiltration into Three-Dimensional Electrospun Scaffolds.

Electrospun Gelatin/poly(l-Lactide-co-ε-caprolactone) Nanofibers for Mechanically Functional Tissue-Engineering Scaffolds

Gas Foaming Of Electrospun Poly(L-Lactide-Co-Caprolactone)/Silk Fibroin Nanofiber Scaffolds To Promote Cellular Infiltration And Tissue Regeneration

Cell Infiltration and Vascularization in Porous Nanoyarn Scaffolds Prepared by Dynamic Liquid Electrospinning

Electrospinning of PLGA/gelatin Randomly-Oriented and Aligned Nanofibers As Potential Scaffold in Tissue Engineering

Nano-fibrous Scaffolding Architecture Enhances Protein Adsorption and Cell Attachment

Nano-fibrous poly(?-lactic acid) scaffolds with interconnected spherical macropores

Partially nanofibrous architecture of 3D tissue engineering scaffolds.

Novel Biomimetic Fiber Incorporated Scaffolds for Tissue Engineering

Cell Adhesive and Growth Behavior on Electrospun Nanofibrous Scaffolds by Designed Multifunctional Composites

Fabrication of a novel Three-Dimensional porous PCL/PLA tissue engineering scaffold with high connectivity for endothelial cell migration

Improvement of cell infiltration in electrospun polycaprolactone scaffolds for the construction of vascular grafts.

Electrospun Poly(lactide-co-glycolide-co-3(S)-methyl-morpholine-2,5-dione) Nanofibrous Scaffolds for Tissue Engineering