A Flexible and Reconfigurable Optical Add-Drop Multiplexer for Mode Division Multiplexing Systems
Yongheng Jiang,Zhenfu Zhang,Junbo Yang,Xu Han,Huifu Xiao,Weiguo Ma,Guanghui Ren,Arnan Mitchell,Yonghui Tian
DOI: https://doi.org/10.1109/lpt.2020.3033714
IF: 2.6
2020-01-01
IEEE Photonics Technology Letters
Abstract:Reconfigurable optical add-drop multiplexer (ROADM) is one of the key building blocks for on-chip optical networks, which can download the desired signals from the bus waveguide to the corresponding drop port and upload the local signals from the add port to the bus waveguide to achieve the signals dropping/adding between the local and the bus waveguide. In this letter, we propose a ROADM based on a Benes network for mode-division multiplexing systems. As a proof of the concept, a ROADM with three quasi-transverse electric modes (TE0-TE2) is fabricated and experimentally demonstrated, which can download signals from TEi (i = 0, 1, 2) mode channel in the bus waveguide to an arbitrary local drop port or upload local signals to TEi mode channel via an arbitrary add port. The excess loss of the fabricated device is less than 10.7 dB, and the crosstalk among different space or mode channels is lower than -13.7 dB. Finally, a 12 Gbps data transmission experiment is carried out to verify the performance of the device. The proposed device is reconfigurable and scalable, and thus, it is expected to be used for optical data processing in the mode-division multiplexing systems.