Abstract:Abstract With increasing aerodynamic and thermal loads, film cooling has been a popular technology integrated into the design of the modern gas turbine vane endwall, especially for the first-stage vane endwall. A staggering amount of research has been completed to quantify the effect of operating conditions and cooling hole geometrical properties. However, most of these investigations did not address the influence of the manufacturing tolerances, assembly errors, and operation degradations on the endwall misalignment. In this paper, uncertainty quantification (UQ) analysis was performed to quantify the impacts of upstream endwall misalignment uncertainties on the endwall film cooling performance and vane surface phantom cooling performance. The upstream endwall misalignment, step geometry with various step heights, commonly exists between the combustor exit and the first-stage vane endwall. Based on the non-intrusive polynomial chaos expansion (NIPC) and the uniform probability distribution assumption, the deviation (step height) uncertainties of the upstream endwall misalignment were quantified. To predict the endwall secondary flow and film cooling effectiveness in the transonic linear vane passage, the commercial computational fluid dynamic solver ANSYS FLUENT was used to numerically solve the three-dimensional steady-state Reynolds-Averaged Navier–Stokes (RANS) equations. The robustness analysis of endwall film cooling performance and phantom cooling performance to the upstream endwall misalignment was conducted for three design upstream step heights (ΔH): a baseline configuration (ΔH = 0 mm), two misaligned configurations with forward step (ΔH = −5 mm) and backward step (ΔH = 5 mm), respectively. Results show that the actual cooling performance has a high probability of deviating from the nominal value for the baseline configuration. The critical regions that are most sensitive to the upstream step misalignment are also identified by variances. The UQ results also show that the design geometry with a forward step has a more robust film cooling performance on endwall and phantom cooling performance on the vane pressure side surface, which means a smaller variance and a better expectation than the no-step configuration. In contrast, the design geometry with a backward step induces the reductions in the expectation of the film cooling effectiveness and coolant coverage and the amplification of performance fluctuations. This work provides a certain guiding direction for the optimization design for the upstream step geometry.

Uncertainty Quantification (UQ) for CFD Simulation of OECD-NEA Cold Leg Mixing Benchmark

Verification, Validation, and Uncertainty Quantification for Electron-Density Diagnostics of Polarimeter/Interferometer System on Experimental Advanced Superconducting Tokamak

Unsteady Rans Simulation Of Oecd-Tamu Cold-Leg Mixing Benchmark

Uncertainty Quantification of Two-Phase Flow in Porous Media Via the Coupled-TgNN Surrogate Model

Uncertainty Quantification of Conjugate Heat Transfer of A Cooled Turbine Vane: Roughness Effect

Large-eddy simulation of the OECD-NEA cold-leg mixing benchmark

Uncertainty Quantification of Aero-Thermal Performance of a Blade Endwall Considering Slot Geometry Deviation and Mainstream Fluctuation

Uncertainty quantification study of CFD on the rod bundle flow

A Validation and Uncertainty Quantification Framework for Eulerian-Eulerian Two-Fluid Model based Multiphase-CFD Solver. Part I: Methodology

Validation and Uncertainty Quantification for Wall Boiling Closure Relations in Multiphase-CFD Solver

Analysis of thermochemical non-equilibrium hypersonic flow over a waverider with uncertainty quantification

Surrogate Model Based Uncertainty Quantification of CFD Simulations of the Viscous Flow Around a Ship Advancing in Shallow Water

INVERSE UNCERTAINTY QUANTIFICATION OF CTF PHYSICAL MODEL PARAMETERS USING BAYESIAN INFERENCE

Uncertainty Quantification of SSG/LRR-ω Turbulence Model Closure Coefficients

A Comprehensive Survey of Inverse Uncertainty Quantification of Physical Model Parameters in Nuclear System Thermal-Hydraulics Codes

Uncertainty Quantification on the Cooling Performance of a Transonic Turbine Vane With Upstream Endwall Misalignment

Data-integrated uncertainty quantification for the performance prediction of iced airfoils

Uncertainties Analysis on the Prediction of Flow and Heat Transfer of Liquid Sodium with CFD Technology

Uncertainty Quantification of Film Cooling Performance of an Industrial Gas Turbine Vane

Uncertainty Quantification of the Surface Properties in Hypersonic Rarefied Cylinder Flows

Uncertainty Quantification of Turbine Endwall Aero-Thermal Performance under Combustor-Turbine Interface Louver Coolant and Cavity