Abstract:The GH4742 nickel-based superalloy exhibits excellent mechanical properties, and grain size is a key factor affecting its performance. A physical model-based ultrasonic backscattering method makes grain size measurement accurate and efficient. Nevertheless, it is constrained by complex models or multiple measurements taken from various beam angles. As a result, a backscattering coefficient method that requires only a single measurement for grain size evaluation is proposed. In contrast to existing methods, the proposed method solely focuses on the backscattering coefficient component of the backscattering signals. It effectively eliminates the influence of unrelated factors, such as the measurement system and the acoustic field, through the utilization of reference signals. The independent scattering model is employed to derive the backscattering coefficient, which solely pertains to the material itself. The relationship between grain size and backscattering coefficient is described using a spatial correlation function. To account for irrelevant factors, an experimental measurement method is developed by the reference signals. Through numerical calculation and analysis, it has been observed that the backscattering coefficient is closely related to the frequency. When the product of the wavenumber and the grain size is significantly greater than 1 (ka≫1), a Stochastic scattering limit is reached. Conversely, when ka≪1, a Rayleigh scattering limit is observed. Furthermore, the backscattering coefficient is directly proportional to the grain size. As a general trend, larger grain sizes result in higher backscattering coefficients. Three sets of GH4742 specimens with different grain sizes are prepared for phased array ultrasound experiments. The consistency of the experimental backscattering coefficients, root mean square (RMS) values, and time-domain signal amplitude trends can be observed. To perform grain size inversion, the backscattering coefficients within the effective bandwidth range of the probe are selected. By utilizing the least-squares method, the theoretical backscattering coefficient is employed to fit the curves of the experimental backscattering coefficients. The evaluation results are compared with those obtained by metallographic analysis. The results show that the grain sizes obtained by the proposed method have a maximum relative error of -22.7% and a minimum relative error of -3.7%.

Application of High-Dimensional Model Representation in the Ultrasonic Evaluation of Superalloy Grain Size

Research on the System Matching Model in Ultrasonic Vibration-Assisted Grinding

Efficient grain size evaluation based on single direction measurement of ultrasonic backscattering coefficient

Hybrid Dimension Based Modeling of Part Surface Topography and Identification of Its Characteristic Parameters

Average grain size evaluation using scattering-induced attenuation of coda waves

Ultrasound Evaluation of the Primary α Phase Grain Size Based on Generative Adversarial Network

Grain size distribution characterization of aluminum with a particle swarm optimization neural network using laser ultrasonics

An Advanced High Dimensional Model Representation Approach for Internal Combustion Engine Modeling and Optimization

Autonomous Characterization of Grain Size Distribution Using Nonlinear Lamb Waves Based on Deep Learning.

Data-driven Time–frequency Analysis of Nonlinear Lamb Waves for Characterization of Grain Size Distribution

Machine learning-assisted constitutive modeling of a novel powder metallurgy superalloy

Ultrasound Cavitation Induced Nucleation in Metal Solidification: an Analytical Model and Validation by Real-Time Experiments.

Improving Ultrasonic Testing by Using Machine Learning Framework Based on Model Interpretation Strategy

Multiscale Simulation of Grain Refinement Induced by Dynamic Recrystallization of Ti6Al4V Alloy During High Speed Machining

Modeling for ultrasonic vibration-assisted helical grinding of SiC particle-reinforced Al-MMCs

A machine learning enabled ultra-fine grain design strategy of Mg–Mn-based alloys

Modeling solid solution strengthening in high entropy alloys using machine learning

Grain Size Characterization by Laser-Based Ultrasonics Based on the Centroid Frequency Shift Method

A Semiquantitative Model on Quick Estimation of the Structural Refinement by Ultrasonic Melt Treatment in Aluminum Alloys

3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys by synchrotron X-ray tomography

Understanding microstructure-property relationships of HPDC Al-Si alloy based on machine learning and crystal plasticity simulation