Abstract:Polyethylene (PE) microporous membrane-supported thin-film composite (TFC) polyamide membranes have received growing attention owing to their low cost, superior separation performance, and excellent chemical robustness. Developing facile and cost-effective methods to hydrophilize PE membranes is essential for the scale-up of PE-supported TFC membranes. Here, a facile approach of in situ polymerization of m -phenylenediamine (MPD) was employed to hydrophilize the PE membranes for the first time. Characterizations showed that both the outer surface and the interior of the PE membrane were homogeneously coated with poly( m -phenylenediamine) (PMPD). The hydrophilicity of the modified PE membrane was dramatically enhanced with the water contact angle decreasing from ∼120° to ∼72° and water flux at 2 bar increasing from 0 to ∼640 L m −2 h −1 . The high surface porosity and appropriate surface hydrophilicity of the MPD-modified PE membrane together with the excellent coating uniformity favor the formation of a highly permselective polyamide active layer. The outstanding coating stability was demonstrated through different tests. The cost of the MPD-modified PE membrane is estimated to be less than 1% of that of conventional substrates. Furthermore, high-performance and low-cost reverse osmosis (RO) membranes were prepared via interfacial polymerization on the MPD-modified PE substrates. The PE-supported RO membrane exhibited an excellent separation performance with NaCl rejection of 99.3%, pure water permeance of 1.3 L m −2 h −1 bar −1 , and long-term operating stability. The proposed hydrophilization strategy of PE membrane is facile, low-cost, environmentally friendly, and reliable, and thus has a brilliant prospect for industrialization.

Reconstructing Polyamide with Nucleophilic Catalyst for Enhancing Reverse Osmosis Membrane Performance

Highly permeable reverse osmosis membranes incorporated with hydrophilic polymers of intrinsic microporosity via interfacial polymerization

Aromatic Polyamide Reverse-Osmosis Membrane: an Atomistic Molecular Dynamics Simulation

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Preparation of high performance polyamide membrane by surface modification method for desalination

Solvent Activation for Building a Homogeneous Polyamide Layer to Enhance Reverse Osmosis Membrane Permeability

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

Preparation of antifouling reverse osmosis membrane with polyacrylic acid brushes based on polydopamine coating assisted atom transfer radical polymerization

Fabrication of high performance polyamide reverse osmosis membrane from monomer 4-morpholino-m-phenylenediamine and tailoring with zwitterions

Ultra-Selective Polyamide Membrane from Metal Organic Framework Assembly Regulated Interfacial Polymerization for Desalination and Water Reuse

Preparation and Characterization of A Novel Polyimide-Urethane Reverse Osmosis Composite Membrane Material

Preparation of Reverse Osmosis Composite Membrane with High Flux by Interfacial Polymerization of Mpd and Tmc

Optimizing Interfacial Polymerization with UV-introduced Photo-Fries Rearrangement for Enhancing RO Membrane Performance

Improving the permselectivity and antifouling performance of reverse osmosis membrane based on a semi-interpenetrating polymer network

Secondary Interfacial Reaction of P-Aminodiphenylamine Enables Polyamide Reverse Osmosis Membrane with Enhanced and Regenerative Chlorine Resistance

A rigid-flexible interpenetrating polyamide reverse osmosis membrane with improved antifouling property fabricated via two step modifications

High-Performance Polyamide Reverse Osmosis Membrane Containing Flexible Aliphatic Ring for Water Purification

Tailoring the asymmetric structure of polyamide reverse osmosis membrane with self-assembled aromatic nanoparticles for high-efficient removal of organic micropollutants

Facile hydrophilization of polyethylene substrate by in situ polymerization of m -phenylenediamine for preparing high-performance polyamide reverse osmosis membrane

Construction of tunable “silica molecular brush” on the polyamide membrane surface for enhancing water permeability and antifouling performance

Synthesis of co-polyamide reverse osmosis membrane constituting a linear aliphatic triamine and m-phenylenediamine for enhanced desalination performance