Abstract:Objective: To explore the design points of a three-dimensional (3D) printed customized cementless intercalary endoprosthesis with an intra-neck curved stem and to evaluate the key points and mid-term effectiveness of its application in the reconstruction of ultrashort bone segments in the proximal femur. Methods: Between October 2015 and January 2021, 17 patients underwent reconstruction with a 3D printed-customized cementless intercalary endoprosthesis with an intra-neck curved stem. There were 11 males and 6 females, the age ranged from 10 to 76 years, with an average of 30.1 years. There were 9 cases of osteosarcoma, 4 cases of Ewing sarcoma, 2 cases of chondrosarcoma, 1 case of liposarcoma, and 1 case of myofibroblastoma. The disease duration was 5-14 months, with an average of 9.5 months. Enneking staging included 16 cases of stage ⅡB and 1 case of stage ⅢB. The distances from the center of the femoral head to the body midline and the acetabular apex were measured preoperatively on X-ray images. Additionally, the distances from the tip of the intra-neck curved stem to the body midline and the acetabular apex were measured at immediate postoperatively and last follow-up. The neck-shaft angle was also measured preoperatively, at immediate postoperatively, and at last follow-up. The status of osseointegration at the bone-prosthesis interface and bone growth into the prosthesis surface were assessed by X-ray films, CT, and Tomosynthesis-Shimadzu metal artefact reduction technology (T-SMART). The survival status of the patients, presence of local recurrence or distant metastasis, and occurrence of postoperative complications were assessed. The recovery of lower limb function was evaluated pre- and post-operatively using the Musculoskeletal Tumor Society (MSTS) scoring system, and pain relief was evaluated using the visual analogue scale (VAS) scores. Results: The patient's femoral resection length was (163.1±57.5) mm, the remaining proximal femoral length was (69.6±9.3) mm, and the percentage of femoral resection length/total femoral length was 38.7%±14.6%. All 17 patients were followed up 25-86 months with an average of 58.1 months. During the follow-up, 1 patient died of lung metastasis at 46 months postoperatively, and the remaining 16 patients survived tumor-free. There was no complication such as periprosthetic infection, delayed incision healing, aseptic loosening, prosthesis fracture, or periprosthetic fracture. No evidence of micromotion or wear around the implanted stem of the prosthesis was detected in X-ray and T-SMART evaluations. There was no significant radiolucent lines, and radiographic evidence of bone ingrowth into the bone-prosthesis interface was observed in all stems. There was no significant difference in the distance from the tip of the curved stem to the body midline and the apex of the acetabulum at immediate postoperatively and last follow-up compared with the distance from the center of the femoral head to the body midline and the apex of the acetabulum before operation, respectively (P>0.05), and there was no significant difference in the above indexes between immediate postoperatively and last follow-up (P>0.05). The differences in the neck-shaft angle at various time points before and after operation were also not significant (P>0.05). At last follow-up, the MSTS score was 26.1±1.2 and the VAS score was 0.1±0.5, which were significantly improved when compared with those before operation [19.4±2.1 and 5.7±1.0, respectively] (t=14.735, P<0.001; t=21.301, P<0.001). At last follow-up, none of the patients walked with the aid of crutches or other walkers. Conclusion: The 3D printed customized cementless intercalary endoprosthesis with an intra-neck curved stem is an effective method for reconstructing ultrashort bone segments in the proximal femur following malignant tumor resection. The operation is reliable, the postoperative lower limb function is satisfactory, and the incidence of complications is low.

Customized Three Dimensional Printed Prosthesis As a Novel Intercalary Reconstruction for Resection of Extremity Bone Tumours: a Retrospective Cohort Study.

Reconstruction of Massive Bone Defects after Femoral Tumor Resection Using Two New-Designed 3D-Printed Intercalary Prostheses: a Clinical Analytic Study with the Cooperative Utilization of Multiple Technologies

Intercalary Prosthetic Reconstruction with Three‐Dimensional‐Printed Custom‐Made Porous Component for Defects of Long Bones with Short Residual Bone Segments after Tumor Resection

Three-dimensional-printed intercalary prosthesis for the reconstruction of large bone defect after joint-preserving tumor resection.

Novel 3D-Printed Prosthetic Composite for Reconstruction of Massive Bone Defects in Lower Extremities after Malignant Tumor Resection

[Mid-term effectiveness of hip preservation in the reconstruction of ultrashort bone segments in the proximal femur with three-dimensional printed customized cementless intercalary endoprosthesis with an intra-neck curved stem]

Intercalary Reconstruction of the “Ultra-Critical Sized Bone Defect” by 3D-Printed Porous Prosthesis after Resection of Tibial Malignant Tumor

Is Three-Dimensional–printed Custom-Made Ultra-Short Stem with a Porous Structure an Acceptable Reconstructive Alternative in Peri-Knee Metaphysis for the Tumorous Bone Defect?

The application of custom 3D-printed prostheses with ultra-short stems in the reconstruction of bone defects: a single center analysis

Comparison of customized 3D-printed prosthesis and screw-rod-cage system reconstruction following resection of periacetabular tumors

Cmar_a_245949 2503..2512

[Effectiveness Evaluation of Three-Dimensional Printed Titanium-Alloy Prosthesis Reconstruction after Distal Tibia Tumor Segment Resection].

Analysis of principles inspiring design of three-dimensional-printed custom-made prostheses in two referral centres

Three-dimensional-printed titanium prostheses with bone trabeculae enable mechanical-biological reconstruction after resection of bone tumours

Reconstruction with a 3D-Printed Megaprosthesis with Ankle Arthrodesis after Distal Tibial Tumor Resection

Individualized Reconstruction For Severe Periprosthetic Fractures Around The Tumor Prosthesis Of Knee Under Assistance Of 3d Printing Technology A Case Report

Aplication of 3D-Printed Prosthesis on Construction of Long Segmental Bone Defect after Tumor Resection

Reconstruction Strategy for Upper Extremity Defects after Bone Tumor Resection Based on 3D Customized Bone Cement Mold.

Short-term outcomes of reconstruction of tumorous critical bone defects at femoral shaft with a 3D printed ultra-short stem with a porous structure

Clinical study of 3D printed personalized prosthesis in the treatment of bone defect after pelvic tumor resection

Application of three-dimensional printed endoprosthesis for reconstruction after metaphysis-involved intercalary tumor resection