Abstract:Bipropellant liquid rocket engines are typically fueled by hydrazines that exhibit extreme toxicity and carcinogenity. Recently hypergolic ionic liquids (HILs) have been emerging as environmentally friendly propellant that holds the potential for hydrazine replacement due to their low volatility, easy and safe storage and handling. The HIL is a novel concept both for chemistry community and for combustion community, and plenty of research waits to be initiated to promote practical propulsion application, especially for comprehensive understanding on their fundamental combustion. In this work, hypergolic ignition of two HILs (1-ethyl-3-methylimidazolium dicyanamide-([EMIm][DCA]) and 1-butyl-3-methyl-imidazolium dicyanamide ([BMIm][DCA]) were tested with three oxidizers (white fuming nitric acid (WFNA), red fuming nitric acid(RFNA), and nitrogen tetroxide). A drop test system was designed to control the collision event of a single droplet of fuel with an oxidizer pool. Two independent high speed cameras were spontaneously employed to capture the self-luminous images of the whole hypergolic ignition process as well as the initial impact process. The results showed that hypergolic ignition process of [EMIm][DCA]-WFNA is quite similar to that of monomethyl hydrazine-WFNA. Combined with thermo physical properties of HILs, hypergolic ignition process of [EMIm][DCA]-WFNA is proposed. To qualitatively demonstrate the overall hypergolic ignition and reactivity, the explosion delay time and the ignition delay times of various combinations of the fuel-oxidizer pairs were determined. The effects of the Weber number on the explosion delay time and the ignition delay time of [EMIm][DCA]-WFNA are quantitatively investigated. Hypergolicity of different propellant combinations is tested to investigate the influence of oxidizer's oxidative capacity and HILs' cation structure. Additionally, the propulsive performance of the two dicyanamide-based IL fuels was evaluated and compared with traditional hydrazine-based fuels, based on a steady rocket model under the same initial conditions. Results show that using WFNA as the oxidizer, BMIM DCA and EMIM DCA presented a comparable propulsive performance to that of UDMH.

Energetic Bimetallic MOF: A Promising Promoter for Ionic Liquid Hypergolic Ignition.

Energetic isostructural metal imidazolate frameworks with bridging dicyanamide linker towards high-performance hypergolic fuels

The Ignition Process Measurements and Performance Evaluations for Hypergolic Ionic Liquid Fuels: [emim][dca] and [Bmim][dca]

Inducing energy storage: Bimetallic MOF-derived Co3O4/NiO nanocomposites for advanced electrochemical applications

“All-in-one” hypergolic metal–organic frameworks with high energy density and short ignition delay

The enhancement of heterobimetallic MOFs on the pyrolysis and laser ignition of FOX-7

Trailblazing 3D MOFs Featuring 1,2,4‐Dinitrimino Triazole: Redefining Energetic Materials and Iodine Encapsulation

Synthesis and characterization of thermally stable energetic complexes with 3,5-diaminopyrazolone-4-oxime as a nitrogen-rich ligand

Hypergolic behavior of methylimidazolium borane and H2O2 promoted by 1-methyl-4,5-diiodoimidazolium iodide

Different Ignition Modes and Temperature Evolution of Typical Hypergolic Ionic Liquids

Energetic metal-organic framework based on multinuclear clusters of Cu(II) and Fe(III) and its catalytic action on thermal decomposition of solid propellant components (RDX, HMX, CL-20 and AP)

Energetic transition metal complexes based on 1‐allylimidazole and nitrocyanamide: Syntheses, characterizations and catalytic performances on the thermal decomposition of ammonium perchlorate

Sensitive structural motifs separately distributed in azide-based 3D EMOFs: A primary explosive with excellent initiation ability and enhanced stability

Experimental Study on Hypergolic Ignition and Non-Ignition for Dicyanamide-Based Ionic Liquids at Low Impact Velocity Conditions

3D Electron-Rich ZIF-67 Coordination Compounds Based on 2-Methylimidazole: Synthesis, Characterization and Effect on Thermal Decomposition of RDX, HMX, CL-20, DAP-4 and AP

Construction of Energetic Complexes Based on LLM-105 and Transition Metal Cations (ni, Co, Mn, and Cu)

DC electrical ignition characteristic of multimode ionic liquid propellant

Integrating three types of structure reinforcements abounding in heat-resistant explosives to construct a 3D solvent-free EMOF with superb stability

Self-Assembly and Controllable Regulation of 1,5′-Bitetrazolate-2n-oxide-based EMOFs Toward High Dimensionality

Novel metal-organic frameworks assembled from the combination of polynitro-pyrazole and 5-nitroamine-1,2,4-oxadiazole: synthesis, structure and thermal properties

Energetic Metal-Organic Frameworks Incorporating NH3OH+ for New High-Energy-Density Materials