Abstract:Repetitive disturbances exist widely within the automation systems, which is one of the major issues that hinder the achievement of precision operations. Dedicated to mitigating these disturbances, a generalized periodic-disturbance observer (PDOB) using spectrum-selection filtering scheme is proposed in this paper with an application to a non-minimum phase system. The design process of the spectrum-selection filter that derives from the comb-like notch filter for the proposed PDOB is presented in detail. The variants of the proposed PDOB are also presented for the disturbances distributed only in odd- and even-harmonics. To achieve tracking of the desired trajectories, the proposed PDOB is combined in parallel with a baseline Proportional-Integral (PI) controller. The stability condition of the closed-loop system is derived to provide criteria for parameters selection. The experimental validation of the generalized PI+PDOB is conducted via real-time cross-coupling suppression in raster scanning of atomic force microscope (AFM), where the coupling induced root-mean-square tracking errors are reduced from 141.8 $nm$ to 2.4 $nm$ by employing the proposed PDOB for the scanning rate of 100 Hz. The results of convergence testing, raster scanning and AFM imaging are compared to illustrate the significant improvements achieved with the proposed PDOB. In addition, experimental results show that the tracking performance using PI+PDOB in the case of existing periodic disturbances resembles with that using PI control without periodic disturbances, which implies that the employment of the proposed PDOB does not interfere with the tracking-based control schemes for staircase trajectories, showing the advantages of the proposed PDOB. Note to Practitioners—Repetitive motions facilitate diverse advanced functions within the automation systems, including the scanning electron microscope, atomic force microscope, manipulators, and robotic systems. These operations would unavoidably introduce repetitive disturbances, hindering its achievable precision. One particular issue is the widely existent cross-coupling effect that results in these repetitive disturbances. In this paper, a generalized periodic-disturbance observer (PDOB) based on the spectrum-selection filtering scheme is developed to address the repetitive disturbances for real-time coupling suppression in raster scanning of Atomic Force Microscopy. Consequently, the offline learning procedures required for other learning based schemes can be avoided. Without loss of generalization, the design of PDOB is demonstrated with an application to non-minimum phase systems. A scheme of the varying parameter is also developed to achieve both fast convergence and better performance at rejecting the periodic disturbances. The detailed variations to handle the disturbances distributed only in odd- and even-harmonics are also demonstrated. Different from other disturbance observers, the inclusion of the spectrum-selection filtering scheme provides more flexibility in rejecting specific repetitive disturbances. In terms of tracking accuracy and the simple structure, this development can also be easily implemented to other systems that suffer from repetitive disturbances.

Parameterized Domain Mapping for Order Tracking of Rotating Machinery

A Novel Demodulation Method for Rotating Machinery Based on Time-Frequency Analysis and Principal Component Analysis

Combined Weighted Envelope Spectrum: an Enhanced Demodulation Framework for Extracting Characteristic Frequency of Rotating Machinery

Order Spectrogram Visualization for Rolling Bearing Fault Detection under Speed Variation Conditions

A Vibration Feature Extraction Method Based on Time-Domain Dimensional Parameters and Mahalanobis Distance

Vibration signal analysis using parameterized time–frequency method for features extraction of varying-speed rotary machinery

Dynamic time warping based instantaneous frequency estimation for rotating machineries under non-stationary operating conditions

Multichannel Signals Reconstruction Based on Tunable Q-Factor Wavelet Transform-Morphological Component Analysis and Sparse Bayesian Iteration for Rotating Machines

Normalizing Vibration Signals with a Novel Piecewise Power Fitting Method for Intelligent Fault Detection of Rotating Machinery

Adaptive tacholess order tracking method based on generalized linear chirplet transform and its application for bearing fault diagnosis

Mono-trend Mode Decomposition for Robust Feature Extraction from Vibration Signals of Rotating Machinery

Low-Rank Constrained Multikernel General Parameterized Time-Frequency Transform and Its Application in Rotating Machine Fault Diagnosis Under Varying Speed Condition

Warped Variational Mode Decomposition with Application to Vibration Signals of Varying-Speed Rotating Machineries

Vold-Kalman Generalized Demodulation For Multi-Faults Detection Of Gear And Bearing Under Variable Speeds

Current-Aided Dynamic Time Warping for Planetary Gearbox Fault Detection at Time-Varying Speeds

The Spectrum Analysis Technology and Feature Extraction of Rotor System Steady and Speeding-Change Process

Periodic-Disturbance Observer Using Spectrum-Selection Filtering Scheme for Cross-Coupling Suppression in Atomic Force Microscopy

Transient Signal Analysis Using Parallel Time-Frequency Manifold Filtering for Bearing Health Diagnosis

An Online Tacholess Order Tracking Technique Based on Generalized Demodulation for Rolling Bearing Fault Detection

Restoring Statistical Cyclicity in Rotating Machinery Vibrations Using the Oscillatory Almost-Cyclostationary Model

Non-stationary Signal Analysis Based on General Parameterized Time–frequency Transform and Its Application in the Feature Extraction of a Rotary Machine