Abstract:Highlights • The predictive model considers highly coupled and nonlinear characteristics in vehicle dynamics for modeling accuracy. • The conversion to additional torques is based on tire longitudinal and lateral motion variations, which reduce the control structure complexity with real-time benefits. • The nonlinear optimization problem can be solved in milliseconds with fast responses by balancing the model accuracy and real-time performance. This paper proposes a real-time NMPC-based controller for four-wheel independent motor-drive electric vehicles to improve vehicle longitudinal and lateral stability under extreme driving conditions. First, considering the interactive and highly coupled longitudinal-lateral vehicle dynamics, a combined-slip tire model is applied to develop the stability controller on low friction coefficient surfaces. Second, the wheel slip ratios and slip angles are selected as the virtual control inputs of the NMPC controller to concurrently achieve three main control objectives: Slip control, lateral stability control, and handling performance improvement. Simultaneously, multiple safety constraints are contained. Then, based on the dynamic relationships between the longitudinal tire force and virtual control inputs, the wheel slip ratios and slip angles obtained from the NMPC controller are converted into additional torques acting directly on each wheel. Finally, the control performance is investigated by co-simulation with MATLAB/Simulink and CarSim, and a hardware-in-the-loop simulation system. The effect of uncertainties on control performance is also verified. The results show that the proposed controller can rapidly solve the optimization problem, and vehicle overall stability are efficiently enhanced under extreme conditions. The robustness of the controller is proved with uncertainties on the road adhesion coefficient and vehicle mass.

An Adaptive MPC Slip Controller for Hub Motor Driven Vehicles with a Novel Linearization Method

Learning-Based MPC Controller for Drift Control of Autonomous Vehicles

Nonlinear MPC-based Slip Control for Electric Vehicles with Vehicle Safety Constraints

Combined Fast Control of Drifting State and Trajectory Tracking for Autonomous Vehicles Based on MPC Controller

Learning-Based Hierarchical Model Predictive Control for Drift Vehicles

MPC-Based Integrated Control of Trajectory Tracking and Handling Stability for Intelligent Driving Vehicle Driven by Four Hub Motor

Coordinated longitudinal and lateral vehicle stability control based on the combined-slip tire model in the MPC framework

Model predictive control for integrated longitudinal and lateral stability of electric vehicles with in‐wheel motors

NMPC-based controller for vehicle longitudinal and lateral stability enhancement under extreme driving conditions

Integrated Longitudinal and Lateral Vehicle Stability Control for Extreme Conditions With Safety Dynamic Requirements Analysis

MPC-Based Slip Ratio Control for Electric Vehicle Considering Road Roughness

An Anti-Slip Control Strategy with Modifying Target and Torque Reallocation for Heavy In-Wheel Motor Vehicle

Real-time model predictive control of connected electric vehicles

Integrated control of in-wheel-motored electric vehicles using a model predictive control method

An Improved Adaptive Sliding Mode Control Approach for Anti-Slip Regulation of Electric Vehicles Based on Optimal Slip Ratio

Integrated control for distributed in-wheel motor drive electric vehicle based on states estimation and nonlinear MPC

Coordinated Longitudinal and Lateral Stability Improvement for Electric Vehicles Based on a Real-Time NMPC Strategy

A Novel Design of Traction Control Based on a Piecewise-Linear Parameter-Varying Technique for Electric Vehicles with In-Wheel Motors

Integrated Control of a Wheel–Track Hybrid Vehicle Based on Adaptive Model Predictive Control

Explicit hybrid MPC for the lateral stabilization of electric vehicle system

A Novel Learning-Based Model Predictive Control Strategy for Plug-In Hybrid Electric Vehicle