The Effect of Cellulose Separator Water-Scavenging on Cycle Life in Lithium-Ion Batteries
Drew Joseph Pereira,Hunter Addison McRay,Saurabh Bopte,Golareh Jalilvand
DOI: https://doi.org/10.1149/ma2023-022147mtgabs
2023-12-22
ECS Meeting Abstracts
Abstract:The presence of water inside a lithium ion (Li-ion) battery causes several interconnected chemical mechanisms that lead to material degradation including transition metal dissolution. [1-4]. As a result, cell performance is reduced, and the cell capacity rapidly fades. To mitigate transition metal dissolution caused by trace water, research groups have proposed various approaches to scavenge and neutralize the water within different components of the cell [4-6]. These methods include using a dehydratable molecular sieve within the cathode active material powder [6], direct dosing of the electrolyte with a water scavenging additive [5], and introducing a metal organic framework with water scavenging properties by mixing it with a polymer binder to create a film for use as a separator. Results from these studies show promise in improving the cycling stability of cells under abuse conditions, such as elevated temperature and high water content in the electrolyte. While these water scavenging techniques show clear benefits to cell capacity retention, they come with the trade-off of higher material cost, more complex production processes, and lower energy density, which have limited their widespread adoption in Li-ion batteries. This study focuses on the use of “cellulose”, a cheap, abundant and naturally dehydrating biopolymer, as a separator material. Cellulose-based separators have been used in Li-ion batteries and shown to be advantageous for capacity retention of the cells. The benefits of the cellulose separators have been attributed to their superior wettability, uniform pore size distribution, high porosity, and low electrical resistance [7-10]. Despite their well-known hydrophilicity, their water scavenging capabilities have not been thoroughly evaluated. In this work, we present new insights into the interaction of water with cellulose-based separator. The water scavenging properties of the cellulose separator are investigated both outside of the battery using the Karl-Fischer Coulometric Titration technique, and inside of the battery through cycling tests. As shown in Figure 1, replacing the conventional polymer-based separator with a cellulose-based nonwoven separator resulted in a significant improvement in cycle life. Furthermore, the water scavenging mechanism of cellulose-based nonwoven separator is studied using surface chemistry characterizations, suggesting water scavenging by the naturally occurring hydrogen bonding sites of cellulose. Additional discussion on drying conditions and the impact of other fiber types are also provided. References: Etacheri, V.; Marom, R.; Elazari, R.; Salitra, G.; Aurbach, D. Challenges in the development of advanced Li-ion batteries: a review. Energy & Environmental Science 2011 , 4 (9), 3243-3262. Yoon, T.; Park, S.; Mun, J.; Ryu, J. H.; Choi, W.; Kang, Y.-S.; Park, J.-H.; Oh, S. M. Failure mechanisms of LiNi0. 5Mn1. 5O4 electrode at elevated temperature. Journal of power sources 2012 , 215 , 312-316. Lux, S.; Lucas, I.; Pollak, E.; Passerini, S.; Winter, M.; Kostecki, R. The mechanism of HF formation in LiPF6 based organic carbonate electrolytes. Electrochemistry Communications 2012 , 14 (1), 47-50 Chang, Z.; Qiao, Y.; Deng, H.; Yang, H.; He, P.; Zhou, H. A stable high-voltage lithium-ion battery realized by an in-built water scavenger. Energy & Environmental Science 2020 , 13 (4), 1197-1204. Sheha, E.; Refai, H. Water scavenger as effective electrolyte additive and hybrid binder‐free organic/inorganic cathode for Mg battery applications. Electrochimica Acta 2021 , 372 , 137883. Zhang, H.; Shi, L.; Zhao, Y.; Wang, Z.; Chen, H.; Zhu, J.; Yuan, S. A simple method to enhance the lifetime of Ni-rich cathode by using low-temperature dehydratable molecular sieve as water scavenger. Journal of Power Sources 2019 , 435 , 226773. Gwon, H.; Park, K.; Chung, S.-C.; Kim, R.-H.; Kang, J. K.; Ji, S. M.; Kim, N.-J.; Lee, S.; Ku, J.-H.; Do, E. C. A safe and sustainable bacterial cellulose nanofiber separator for lithium rechargeable batteries. Proceedings of the National Academy of Sciences 2019 , 116 (39), 19288-19293. Jiang, F.; Yin, L.; Yu, Q.; Zhong, C.; Zhang, J. Bacterial cellulose nanofibrous membrane as thermal stable separator for lithium-ion batteries. Journal of Power Sources 2015 , 279 , 21-27. Wang, Y.; Liu, X.; Sheng, J.; Zhu, H.; Yang, R. Nanoporous regenerated cellulose separator for high-performance lithium ion batteries prepared by nonsolvent-induced phase separation. ACS Sustainable Chemistry & Engineering 2021 , 9 (44), 14756-14765. Lv, D.; Chai, J.; Wang, P.; Zhu, L.; Liu, C.; Nie, S.; Li, B.; Cui, G. Pure cellulose lithium-ion battery separator with tunable pore size and improved working stability by cellulose nanofibrils. Carbohydrate polymers 2021 , 251 , 116975. Figure 1