Abstract:This experimental research focused on the combined effect of wire mesh and spray mist on the syngas explosion. The difference between flame propagation and pressure rise under success and failure conditions was analyzed, and the influence rule and mechanism of spray condition were determined. Results indicate that the synergistic effect was related to the spray condition and was affected by mist parameters. Nozzle type and spray pressure could change the mist parameters, thus affecting the inhibition effect of mist on explosion. Compared with failure condition, the pressure history of lower end only presented an acceleration process under success condition, and the pressures at both ends were evidently decreased. As the nozzle type increased, the mist parameter was increased. Flame propagation velocity and explosion intensity of upper end were reduced. Especially, the dwell time of flame inside the wire mesh was prolonged. As the spray pressure increased, the comprehensive effect of changes in mist parameters resulted in a change process of failure - success - failure. The velocity history and explosion intensity showed a trend of decreasing first and then increasing. Temperature history also exhibited the same variation regular. Apart from the energy weakening and wall effect of wire mesh on flame and compression wave, the flame front would form four structures affected by water mist: the laminar flame, small-scale weakly turbulent flame, large-scale weakly turbulent flame, and large-scale strong turbulent flame after contacting with mist. The change of mist parameters could cause varying degrees of disturbance and pulsation intensities on flame front, thereby affecting the physical and chemical effects of mist on flame. The inhibitory effect of wire mesh could be enhanced on the syngas explosion after adding mist, and was affect by the comprehensive effect of mist parameters.

Experimental Research on the Flame Resistance Characteristics of Wire Mesh for Syngas Explosion

Effect of Wire Mesh Structure Parameter on the Flame Propagation Characteristics of Syngas Explosion

Study on the synergy inhibition of ultrafine water mist and metal wire mesh on the syngas explosion

Experimental research on the synergy effect of resistance/inhibition on the syngas explosion

Large eddy simulation and experimental study of the effect of wire mesh on flame behaviours of methane/air explosions in a semi-confined pipe

Effect of Single-Layer Wire Mesh on Premixed Methane/air Flame Dynamics in a Closed Pipe

Suppression characteristics of multi-layer metal wire mesh on premixed methane-air flame propagation

Wire-mesh Inhibition of Jet Fire Induced by Explosion Venting

Effect of Wire Mesh on Double-Suppression of CH4/air Mixture Explosions in a Spherical Vessel Connected to Pipelines

Effect of Metal Wire Mesh on Premixed H2/air Flame Quenching Behaviors in a Closed Tube

Research on the Resistance Characteristics of Corrugated Flame-Retardant System for Hydrogen/methane Explosion

Experimental study on the influence of multi-layer wire mesh on dynamics of premixed hydrogen-air flame propagation in a closed duct

Suppression Effect of Explosion in Linked Spherical Vessels and Pipelines Impacted by Wire‐mesh Structure

Experimental Study on Gas Explosion Propagation in Porous Metal Materials

Effect of Transverse Flow on Flame Spread and Extinction over Polyethylene-Insulated Wires

Experimental Study of the Effect of CO/H2 Ratio and Release Pressure on Syngas Jet Flame Propagation and Overpressure

Double-suppression effect of wire mesh on gas explosion in linked vessels

Experimental Study on Explosion of Premixed Methane-air with Different Porosity and Distance from Ignition Position

Effect of Ignition Position on Premixed Hydrogen-Air Flame Quenching Behaviors under Action of Metal Wire Mesh

Experimental Research on the Inhibition of Methane/Coal Dust Hybrid Explosions by the Ultrafine Water Mist

Flame-Retardant Wire Burning Behavior by Jet Flame Heating: Ignition, Charring, and Secondary Flame Spread